3D mini - Lack of precision of the scanner

[ivan]

I advise to check calibration values from time to time and recalibrate if needed.

[Windows & Mac ] Revopoint Calibration Software

Note: It is not recommended to calibrate a new scanner. Please perform a Calibration test before actual Calibration if you think it is needed , to see if your device actually needs Calibration or not Please download Calibration software for POP2 & MINI ( POP, Range and POP3 is not supported with this version of Calibration software, please do not attempt) Windows : Revo_Calibration_for_win_v1.0.2.31.zip - Google Drive Mac : Revo_Calibration_for_mac_v1.0.1.17.zip - Google Drive Calibratio…

Calibration Issues & Tips

For those that going to calibrate MINI , you don’t need to put the scanning board on the angle , just angle the MINI focusing on the small dots as guide for the horizontal line until it appears green . Use some light on the side , not calibrate in dark light conditions, I used the Revopoint LED on this side . I calibrated using this software 3 devices, the results was 0.0235 what is the highest I ever got with fantastic scanning results and sharpness even on my Mini Beta device . But before …