Revoscan 5.4.1 doesn't see the Miraco over USB (MacOS)

[PUTV]

@Archaeoscan.by

At least Revoscan let my import Miraco files.

So if it let you import Miraco files via Revo Scan so what is the problem ?
You can’t do that without Transfer Data connection .

Go to Miraco Settings , then plug in the white cable to Miraco and your computer and see if under settings you get USB label on top , if yes click it and choice your connection type …

@Archaeoscan.by

Also Wifi doesn’t work. Miraco is in the Wifi, but the transfer gets an error: please check if Miraco is in the same network. I have a master/slave repeater network, but of course same SSID.

As @Bjrno mentioned early today there is issue with channel 112 in Europe , this maybe your issue of the setting of your router .

@Archaeoscan.by

If Miraco is only working with special hardware brands, that should be stated.

I never said that , this have nothing to do with specific brand but the quality of the motherboards that not always deliver as promised , so it is not Recopoint fault that on one computer it works and on another it don’t .

@Archaeoscan.by

The data import via usb only worked one time, the next time i plugged in USB cable, Miraco wasn’t recognised. Tried both black an white cable

Please follow the steps that I mentioned above , you should have no issue with data transfer using USB , just activate it via settings after connection , if you do not activate it , there is no connection .
Data transfer works on all my computers regardless.