Pop 3 Plus - Scanning Silicone Rubber (Transparent)

[ivan]

Hi!
If you cannot wash the piece off easily you can use aesub blue or attblime (with different sublimation times). Otherwise some foot spray or dry shampoo is what you can get as an easy and pretty cheap solution.

There is a great DIY scanning spray solution with non-nano zinc powder+ IPA, as described here by @PUTV:

Moctezuma's Challenge - Aztec Calendar

You need s non nano zinc oxide , I use this one for years 1 Pound Bag - NON NANO Uncoated - 100% Pure Pharmaceutical Grade Mix it with rubbing alcohol or any alcohol 75-95% Until you get slightly milky consistency, something like 2% milk , less is more , you don’t need to make your objects white , just slightly matte , kinds frosting effect what you need. You can use a simple spray bottle you find at home , or airbrush . For very big objects you can use even a old Lysol spray bottle for e…

Remember, especially when using commercial 3d sprays, you only need to to dust the surface a little and not to turn it completely into white .