You need to scan this in at least 2 scans, maybe 3 and do a merge.
Also you need to use either crumpled paper to add scan features to the shapes or use markers in marker mode on a turntable for example, one foot at a time
[image]
[image]
For future reference here is a cheap, easy and clean way to add enough features for a great scan alignment. Another solution one can use is crumpled fabrics, specially when scanning car features with the range
Scan made with the mini, fuse 0.2 mm and mesh quality 6, no post processing, not only the resulting mesh is clean and smooth but one can clearly see the tape thickness used to keep the broken part together
Other similar and usefull techniques are listed in these video…
As per @ivan request here is the pattern and the method i used to place the markers in my manual clay turntable
Mine is one similar to these 5 Size Pottery Banding Wheel Manual Forming Sculpting Turntable Ceramic Clay Art | eBay but with a custom metal stand and long axis
[image]
I started with a spiral and conter spiral of 1 (ones)
Then i go spinning around starting with a pattern of 1, 2, 3, then 1|1, 1|2, 1|3 , 1|4 … and then I adapt as i go trying to keep the clusters as a clear and un…
1 Like