# X3msnake - Mini Showcase **URL:** \ **Category:** MINI Series\ **Created:** [July 7, 2023, 6:21pm UTC](https://forum.revopoint3d.com/t/x3msnake-mini-showcase/21477 "2023-07-07T18:21:57Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![X3msnake](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/x3msnake/32/5218_2.png) [@X3msnake](https://forum.revopoint3d.com/u/X3msnake)\ **Post date:** [July 7, 2023, 6:21pm UTC](https://forum.revopoint3d.com/t/x3msnake-mini-showcase/21477/1 "2023-07-07T18:21:57Z")
# Small part reverse engineering for repair Part is from a set up collar of a umbrella by casualfs, the original part from a second umbrella was lost and needs to be reproduced since it is only sold as a full setup collar assembly ZL200320109058.7 Scan was done on a manual turntable over crumpled paper for perfect feature tracking, scan was done in 2 parts and merged, meshed and simplified in Revostudio ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/7/7c5a4a618d60f9e7e7b62b38e1fa74a3d8066d75.jpeg) ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/0/054c46527aa757a1f523bd5538699e327fb40d94.jpeg) ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/b/bbf326be8c2121dbaf04dc3ebf66e4324454743a.jpeg) ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/8/80ab43b3f0231036b2b3c7e3da878d36e33ab7e9.jpeg) ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/0/05494af3547da3c10b5f702b80b600a962e1036f.jpeg) Part is available for viewing, download and inspection on my sketchfab 😉 https://sketchfab.com/models/135f1ab462844882a9d0f7b404867118/embed? ---
**Author:** ![X3msnake](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/x3msnake/32/5218_2.png) [@X3msnake](https://forum.revopoint3d.com/u/X3msnake)\ **Post date:** [July 7, 2023, 8:27pm UTC](https://forum.revopoint3d.com/t/x3msnake-mini-showcase/21477/2 "2023-07-07T20:27:54Z")
# Umbrella tighten knob RE ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/c/c0bce2cde9a2428cfad807cb58a7e2e0f069ab1f.jpeg) ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/7/77a1d51b275c0c12742546282f3100909cfa9b7e.jpeg) ![image|646x500] (upload://mHTepeMfq7LYIZ7kFcSsVY8Pq3V.jpeg) ![IMG_20230707_212707](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/b/b4cae7d24b22bccc410b5ee5ecca9e3831c241f0.jpeg) https://sketchfab.com/models/eaea02dfdccf4924a68bc6239dc97bc9/embed? ---
**Author:** ![X3msnake](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/x3msnake/32/5218_2.png) [@X3msnake](https://forum.revopoint3d.com/u/X3msnake)\ **Post date:** [August 4, 2023, 2:02am UTC](https://forum.revopoint3d.com/t/x3msnake-mini-showcase/21477/3 "2023-08-04T02:02:27Z")
# Toilet screw for reverse engineering and repair (downloadable) https://sketchfab.com/models/dbd9aac7d11a479b8adb557afdc2480d/embed? ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/b/bcdf3ee03d60a4876454d47021e98f77a30a3914.jpeg) ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/b/b3a990d6050a683aca9fac167fa9839c6a15708f.jpeg) ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/a/a0f4cd1ac1908b8e21af8b8c7608c7cacf75e55f.jpeg) ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/d/d3a3377d7d5c54e9b58afc5649a94bf709119431.jpeg) ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/0/0a13f34bc106c0a41a6704af4e982d18e9b96c4b.jpeg) ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/b/b49c661d4e1ee1151487bbd3fc5ef54de9ea9bff.png) ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/c/c2748ab72ce9f28c67f6d9e81cee0adf0cddce04.png) ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/c/c92c76a3be0ae2b47e160cc35996a33f34e1dbb4.png) ![screwprint](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/a/ae2ca61efc3f623a22819597ec8bf86c03b8f810.gif) ![screw_print](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/1/183d8407275ff4a7aacf749004c3f5c36ffc537d.gif) ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/6/6d1bfa98399e7251f864d72c38a1a033ff9d8118.jpeg) ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/6/6bc863467a1b7c307b6b32931e9f30a7aacea375.jpeg) ---
**Author:** ![X3msnake](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/x3msnake/32/5218_2.png) [@X3msnake](https://forum.revopoint3d.com/u/X3msnake)\ **Post date:** [August 4, 2023, 2:26am UTC](https://forum.revopoint3d.com/t/x3msnake-mini-showcase/21477/4 "2023-08-04T02:26:15Z")
# Toilet hook for reverse engineering and repair https://sketchfab.com/models/f18e2c8ff8564227a7653cc14f0c9eac/embed? ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/e/eddc9c5fa0d3c802817f922ed6b69a2d0340c7a1.jpeg) ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/3/3e1352b67b33c79cae15035362f50168fd8cc8c9.jpeg) ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/5/5838353a365e4b6651810172f5bc26946619886e.jpeg) ---
**Author:** ![X3msnake](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/x3msnake/32/5218_2.png) [@X3msnake](https://forum.revopoint3d.com/u/X3msnake)\ **Post date:** [August 4, 2023, 2:54pm UTC](https://forum.revopoint3d.com/t/x3msnake-mini-showcase/21477/5 "2023-08-04T14:54:19Z")
# Selfie with mini Here is the model on Sketchfab https://sketchfab.com/models/eb3182736c274e288935de51fa6d6c1e/embed? This is what i had to do to capture my dark beard 🙂 ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/2/24577859258c8dbd165ccff77c189e032eaa03ad.jpeg) ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/3/362267aed65eb7ace6cf77647792fc0b812d9a28.jpeg) This is what the mini picks up without flour dusting https://sketchfab.com/models/5e56d1ae400e45e7b459cab2d922a7aa/embed? # Selfie scan of the printed selfie Setup ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/7/7152cef362ada67e408af3817daf015f7eeb73c5.jpeg) Fusion 0.02 ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/8/839e0fe9680298a43a5cdf13a5e2d1ec48c0b73b.jpeg) Meshing 6.0 no cleaning ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/0/0d2c8fd4f86539f98f5caaf9ecea3c868ed3f8e9.jpeg) 1x F20 C0.5 ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/6/638f575ea76740a6ca7e2567329beeb844f21bcb.jpeg) ---
**Author:** ![X3msnake](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/x3msnake/32/5218_2.png) [@X3msnake](https://forum.revopoint3d.com/u/X3msnake)\ **Post date:** [September 12, 2023, 12:23am UTC](https://forum.revopoint3d.com/t/x3msnake-mini-showcase/21477/6 "2023-09-12T00:23:01Z")
# INSPIRE scan for CAD reverse engineering 3D scan of a Revopoint INSPIRE scanner, done with a Revopoint mini scanner for reverse engineering and CAD replication. Scan was done with aesub orange, multiple scans, using crumpled jeans fabric as a feature registration. Parts where merged with cloudcompare and meshed back in Revoscan At one point when i scanned the faceplate the spray was already evaporating (hot day) and the jeans got recorded into the faceplace as reflection https://sketchfab.com/models/f0181239f96847f5824c365250c8ee14/embed? ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/3/3d73c5c74ebd6a31b7988c8c4483cf892c5fc0c7.jpeg) ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/5/50de17d8fcbdf553da2f38a4cbca4712b0c92317.jpeg) ---
**Author:** ![X3msnake](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/x3msnake/32/5218_2.png) [@X3msnake](https://forum.revopoint3d.com/u/X3msnake)\ **Post date:** [September 28, 2023, 11:03pm UTC](https://forum.revopoint3d.com/t/x3msnake-mini-showcase/21477/7 "2023-09-28T23:03:54Z")
# Qilive wireless audio unit Scanned with R5.3.0.523 in one session using feature mode and resume taking advantage of the new edit frames feature - Scanned the bottom side first, edited the frames to remove the turntable overlap and the extraneous objects used for feature tracking. - Flipped the object and resumed the scan scanning the other side. - Edited Raw frames again to cleanup the extraneous objects - Fused at 0.08 - Removed isolated points with default 15% - Fused mesh at 5.9 with close holes 30% - Smoothed once at T3 S0.1 - Simplified mesh at 70% ( from 2M to 7K vertexes) - Used Cloudcompare to orient flat the part and uploaded to sketchfab for download ## Downloadable final mesh https://sketchfab.com/models/22c212eae40b4d719ea6c3d887668089/embed? ## Model ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/1/11050b95565099bf941849ba78450f65d8b1a0b6.jpeg) ## Setup ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/1/10b09d4818028c860485f76703c520c29d80cbaf.jpeg) ## Fused pointcloud ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/8/80b4582e624e324585eabff8ec0ffb94beb024ac.jpeg) ## Final notes Since Revopoint is still lacking the ability to align a model to ortographic planes here is a quick tutorial on how to do it with 3 point levelling in CloudCompare [![](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/5/517c8ca279756d171c49687a67ad37dffa24d6b9.jpeg "Cloudcompare - Quicktips - Level model to ortographic planes") ](https://www.youtube.com/watch?v=Ew66I384X4w) ---
**Author:** ![G-druckt](https://avatars.discourse-cdn.com/v4/letter/g/5fc32e/32.png) [@G-druckt](https://forum.revopoint3d.com/u/G-druckt)\ **Post date:** [May 23, 2024, 11:11am UTC](https://forum.revopoint3d.com/t/x3msnake-mini-showcase/21477/8 "2024-05-23T11:11:08Z")
Thanks for this great tutorial!