# Vevor 3018 Motherboard - Revopoint Mini

**URL:** <https://forum.revopoint3d.com/t/vevor-3018-motherboard-revopoint-mini/20714>\
**Category:** MINI Series\
**Created:** [April 21, 2023, 6:05pm UTC](https://forum.revopoint3d.com/t/vevor-3018-motherboard-revopoint-mini/20714 "2023-04-21T18:05:46Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![X3msnake](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/x3msnake/32/5218_2.png) [@X3msnake](https://forum.revopoint3d.com/u/X3msnake)\
**Post date:** [April 21, 2023, 6:05pm UTC](https://forum.revopoint3d.com/t/vevor-3018-motherboard-revopoint-mini/20714/1 "2023-04-21T18:05:46Z")

</div>

https://sketchfab.com/models/a2c48f6f596c49e3964a6d1169615667/embed?

Vevor 3018 CNC mainboard, scanned with Revopoint Mini, feature mode over a piece of crumpled paper. Model was prepared with a ligh coat of aesub orange, scan was made over a manual clay turntable.

Scanned on PC with Revostudio 5.0.2.214, pointcloud cleanup and meshing done on CloudVompare at level 10, mesh simplification done with prusa slicer 2.5.2

---

<div class="post-metadata">

**Author:** ![Revopoint-Cassie](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/revopoint-cassie/32/8972_2.png) [@Revopoint-Cassie](https://forum.revopoint3d.com/u/Revopoint-Cassie)\
**Post date:** [April 23, 2023, 8:12am UTC](https://forum.revopoint3d.com/t/vevor-3018-motherboard-revopoint-mini/20714/2 "2023-04-23T08:12:45Z")

</div>



---

<div class="post-metadata">

**Author:** ![Revopoint-Cassie](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/revopoint-cassie/32/8972_2.png) [@Revopoint-Cassie](https://forum.revopoint3d.com/u/Revopoint-Cassie)\
**Post date:** [April 23, 2023, 8:13am UTC](https://forum.revopoint3d.com/t/vevor-3018-motherboard-revopoint-mini/20714/3 "2023-04-23T08:13:28Z")

</div>

Hi @X3msnake ，

This scan is so impressive! I have pinned it to the top. Thank you for sharing!

Best Regards  
Cassie

---

<div class="post-metadata">

**Author:** ![X3msnake](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/x3msnake/32/5218_2.png) [@X3msnake](https://forum.revopoint3d.com/u/X3msnake)\
**Post date:** [April 23, 2023, 12:07pm UTC](https://forum.revopoint3d.com/t/vevor-3018-motherboard-revopoint-mini/20714/4 "2023-04-23T12:07:46Z")

</div>

![IMG_20230421_153103](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/a/aaa699b789dae238d07aa62b968ea23c5fb4cc5f.jpeg)

the scanning setup, using crumpled paper and aesub as a feature booster

---

<div class="post-metadata">

**Author:** ![SphaeroX](https://avatars.discourse-cdn.com/v4/letter/s/5f8ce5/32.png) [@SphaeroX](https://forum.revopoint3d.com/u/SphaeroX)\
**Post date:** [April 25, 2023, 7:43pm UTC](https://forum.revopoint3d.com/t/vevor-3018-motherboard-revopoint-mini/20714/5 "2023-04-25T19:43:40Z")

</div>

did you have to cut the paper away afterwards?

---

<div class="post-metadata">

**Author:** ![X3msnake](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/x3msnake/32/5218_2.png) [@X3msnake](https://forum.revopoint3d.com/u/X3msnake)\
**Post date:** [April 25, 2023, 10:29pm UTC](https://forum.revopoint3d.com/t/vevor-3018-motherboard-revopoint-mini/20714/6 "2023-04-25T22:29:05Z")

</div>

yes, you select the board from a top view and clip the outside