# Using Revopoint POP2 to Make Replacement Parts

**URL:** <https://forum.revopoint3d.com/t/using-revopoint-pop2-to-make-replacement-parts/12098>\
**Category:** Showcases\
**Created:** [April 23, 2022, 12:46am UTC](https://forum.revopoint3d.com/t/using-revopoint-pop2-to-make-replacement-parts/12098 "2022-04-23T00:46:04Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![nafis](https://avatars.discourse-cdn.com/v4/letter/n/8c91f0/32.png) [@nafis](https://forum.revopoint3d.com/u/nafis)\
**Post date:** [April 23, 2022, 12:46am UTC](https://forum.revopoint3d.com/t/using-revopoint-pop2-to-make-replacement-parts/12098/1 "2022-04-23T00:46:04Z")

</div>

[![](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/e/ed8053a5386391845a7be20dd95dfb0b7defb550.jpeg "Using Revopoint POP2 to make Replacement Parts") ](https://www.youtube.com/watch?v=5ncrD6cLTjU)

People ask me all the time what you can do with the Revopoint POP 3D Scanner. My neighbor had a broken part off a 2HP 1700 RPM electric motor and wondered if I could scan and 3D print it. It took me about 1.5 hours to 3D scan and to do the CAD work. It was around an 8 hour print job. The results came out nice!

---

<div class="post-metadata">

**Author:** ![Miamijerry](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/miamijerry/32/4734_2.png) [@Miamijerry](https://forum.revopoint3d.com/u/Miamijerry)\
**Post date:** [April 23, 2022, 1:10am UTC](https://forum.revopoint3d.com/t/using-revopoint-pop2-to-make-replacement-parts/12098/2 "2022-04-23T01:10:33Z")

</div>

So many talented people on this forum, Fantastic job !

---

<div class="post-metadata">

**Author:** ![KnightRid](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/knightrid/32/126_2.png) [@KnightRid](https://forum.revopoint3d.com/u/KnightRid)\
**Post date:** [April 23, 2022, 9:41am UTC](https://forum.revopoint3d.com/t/using-revopoint-pop2-to-make-replacement-parts/12098/3 "2022-04-23T09:41:11Z")

</div>

This is great! I got the original POP for this purpose but it hasn’t worked out very well for me so far.

---

<div class="post-metadata">

**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\
**Post date:** [April 23, 2022, 11:21am UTC](https://forum.revopoint3d.com/t/using-revopoint-pop2-to-make-replacement-parts/12098/4 "2022-04-23T11:21:29Z")

</div>

@nafis Great work Chris !

---

<div class="post-metadata">

**Author:** ![Miamijerry](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/miamijerry/32/4734_2.png) [@Miamijerry](https://forum.revopoint3d.com/u/Miamijerry)\
**Post date:** [April 23, 2022, 12:04pm UTC](https://forum.revopoint3d.com/t/using-revopoint-pop2-to-make-replacement-parts/12098/5 "2022-04-23T12:04:18Z")

</div>

What is the program you used for reconstruction?  
That measured the fins and disk?

I see now  
Geomagic Design X