# Testing the range on my trackday car

**URL:** <https://forum.revopoint3d.com/t/testing-the-range-on-my-trackday-car/21007>\
**Category:** RANGE Series\
**Created:** [May 18, 2023, 3:06pm UTC](https://forum.revopoint3d.com/t/testing-the-range-on-my-trackday-car/21007 "2023-05-18T15:06:42Z")\
**Posts on this page:** 5\
**Page:** 2

<div class="post-metadata">

**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\
**Post date:** [May 29, 2023, 4:47am UTC](https://forum.revopoint3d.com/t/testing-the-range-on-my-trackday-car/21007/21 "2023-05-29T04:47:33Z")

</div>

It should not make big difference as long there are always at least 3 markers visible at all the time in the FOV .  
And as always, you do what works best in your workflow .

---

<div class="post-metadata">

**Author:** ![Scan2Model](https://avatars.discourse-cdn.com/v4/letter/s/977dab/32.png) [@Scan2Model](https://forum.revopoint3d.com/u/Scan2Model)\
**Post date:** [May 29, 2023, 11:21pm UTC](https://forum.revopoint3d.com/t/testing-the-range-on-my-trackday-car/21007/22 "2023-05-29T23:21:21Z")

</div>

Hi,  
I am getting much better results now, I suspect the big shiny headlamp in the middle of the scan isnt helping much.  
I havent applied any spray to the vehicle at all, it seems to pick up the shining white paint quite well.  
I tried both Marker mode and Feature mode, this is one single scan.  
Mike.

 ![Mitsubishi](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/7/7f8d8c7de47fa231beeaf37bdd6265290fdf00b6.jpeg)

---

<div class="post-metadata">

**Author:** ![osdecar](https://avatars.discourse-cdn.com/v4/letter/o/7ab992/32.png) [@osdecar](https://forum.revopoint3d.com/u/osdecar)\
**Post date:** [May 30, 2023, 5:36am UTC](https://forum.revopoint3d.com/t/testing-the-range-on-my-trackday-car/21007/23 "2023-05-30T05:36:22Z")

</div>

Hi Mike, that looks great!

Have you used feature mode or marker mode?

Where did you get the markers?

---

<div class="post-metadata">

**Author:** ![Scan2Model](https://avatars.discourse-cdn.com/v4/letter/s/977dab/32.png) [@Scan2Model](https://forum.revopoint3d.com/u/Scan2Model)\
**Post date:** [May 30, 2023, 10:59pm UTC](https://forum.revopoint3d.com/t/testing-the-range-on-my-trackday-car/21007/24 "2023-05-30T22:59:49Z")

</div>

Hi, I tried both methods, Feature mde seemed to work better.  
Another factor could be that I was working outside, after sunset.  
It is nearly winter here, so the car was accumulating Dew quite quickly.  
I would really like to try this inside a Shed 🙂  
I made the cubes on my 3D printer.  
Regards,  
Mike.

---

<div class="post-metadata">

**Author:** ![Scan2Model](https://avatars.discourse-cdn.com/v4/letter/s/977dab/32.png) [@Scan2Model](https://forum.revopoint3d.com/u/Scan2Model)\
**Post date:** [June 4, 2023, 10:56pm UTC](https://forum.revopoint3d.com/t/testing-the-range-on-my-trackday-car/21007/25 "2023-06-04T22:56:26Z")

</div>

> [@osdecar](#):
>
> Where did you get the markers?

> [@Weird Spiral Scan](https://forum.revopoint3d.com/t/weird-spiral-scan/20856/33):
>
> You just cut out the cubes out and close the holes using plane or curved mode , if you are not familiar with 3D modeling , in most cases the scans are used for reference to build a model based on it , not matters it is hard edge models or organic models , the scans are not usable for anything else but references anyway , unless of course you want to print it or for online showcase . But we talking here more about scanning for references .

[Previous page](https://forum.revopoint3d.com/t/testing-the-range-on-my-trackday-car/21007.md?page=1)