# Surface and color problems after merging

**URL:** <https://forum.revopoint3d.com/t/surface-and-color-problems-after-merging/21313>\
**Category:** Issues\
**Created:** [June 18, 2023, 7:52am UTC](https://forum.revopoint3d.com/t/surface-and-color-problems-after-merging/21313 "2023-06-18T07:52:14Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![Archaeoscan.by](https://avatars.discourse-cdn.com/v4/letter/a/e68b1a/32.png) [@Archaeoscan.by](https://forum.revopoint3d.com/u/Archaeoscan.by)\
**Post date:** [June 18, 2023, 9:02am UTC](https://forum.revopoint3d.com/t/surface-and-color-problems-after-merging/21313/4 "2023-06-18T09:02:30Z")

</div>

Thanks a lot,

it is true that i slightly shifted distance at each scan. So i shouldn’t do that, instead turn depth and color exposure to manual.  
But i dindn’t lay the sherd flat on the turntable.  
Here you can see my setup, is it ok?

 ![20230618_105726](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/0/0357c6193771fa15ca43eafc694cf504c3a53d66.jpeg)

---

_[View the full topic](https://forum.revopoint3d.com/t/surface-and-color-problems-after-merging/21313)._