# Suggestions needed

**URL:** <https://forum.revopoint3d.com/t/suggestions-needed/21448>\
**Category:** Support & Feedback\
**Created:** [July 3, 2023, 10:08pm UTC](https://forum.revopoint3d.com/t/suggestions-needed/21448 "2023-07-03T22:08:36Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![IndyColtsFan](https://avatars.discourse-cdn.com/v4/letter/i/958977/32.png) [@IndyColtsFan](https://forum.revopoint3d.com/u/IndyColtsFan)\
**Post date:** [July 3, 2023, 10:08pm UTC](https://forum.revopoint3d.com/t/suggestions-needed/21448/1 "2023-07-03T22:08:37Z")

</div>

Hey there, I’m using the new Revoscan 5.1 and am scanning an action figure. The details are great! I do have one question though. How can I eliminate the “noise” between the legs and body/arms? Or can I? Just looking for some options to try other than putting the file in Blender or another tool and removing it.

 ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/1/1c9efa2d3b883e747529ea451f28aba94bec4fe5.png)

---

<div class="post-metadata">

**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\
**Post date:** [July 4, 2023, 2:30am UTC](https://forum.revopoint3d.com/t/suggestions-needed/21448/2 "2023-07-04T02:30:54Z")

</div>

Hi @IndyColtsFan you need to clean the legs and arms area before you mesh the point cloud , best after fusing ,you can use the tool on the right side of the software screen , select what you want to go and click the bean icon to remove

Please use Advanced mode if you don’t want to clean too much manually … other way you have to clean lose points

---

<div class="post-metadata">

**Author:** ![IndyColtsFan](https://avatars.discourse-cdn.com/v4/letter/i/958977/32.png) [@IndyColtsFan](https://forum.revopoint3d.com/u/IndyColtsFan)\
**Post date:** [July 4, 2023, 11:36am UTC](https://forum.revopoint3d.com/t/suggestions-needed/21448/3 "2023-07-04T11:36:56Z")

</div>

Thanks! What is the tool or menu selection called that I would use?

---

<div class="post-metadata">

**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\
**Post date:** [July 4, 2023, 11:42am UTC](https://forum.revopoint3d.com/t/suggestions-needed/21448/4 "2023-07-04T11:42:14Z")

</div>

> [@IndyColtsFan](#):
>
> Thanks! What is the tool or menu selection called that I would use?

You can use any of them , depends of what you need , but in your case the lasso would be the best, it is on the right side of the app starting from top

---

<div class="post-metadata">

**Author:** ![IndyColtsFan](https://avatars.discourse-cdn.com/v4/letter/i/958977/32.png) [@IndyColtsFan](https://forum.revopoint3d.com/u/IndyColtsFan)\
**Post date:** [July 4, 2023, 11:55am UTC](https://forum.revopoint3d.com/t/suggestions-needed/21448/5 "2023-07-04T11:55:40Z")

</div>

As usual, you rock. Thanks!