# Steamkraft | SHOWCASE | Revopoint MINI 2 3D Scanner
**URL:** https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788
**Category:** MINI Series
**Created:** [January 23, 2024, 5:39pm UTC](https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788 "2024-01-23T17:39:50Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@Steamkraft](https://forum.revopoint3d.com/u/Steamkraft)
#### Post date: [January 23, 2024, 5:39pm UTC](https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788/1 "2024-01-23T17:39:50Z")
Hi everyone! here is my Showcase for the Mini 2
I hope you like it
**MINI 2 is available for buying on Revopoint Official Shop!**
**You can buy it by clicking the link below:**
US: [https://bit.ly/4bsPcnd](https://bit.ly/4bsPcnd)
GLOBAL: [https://bit.ly/4bcm6YZ](https://bit.ly/4bcm6YZ)
so here now the first Scan 🙂
**Jewelry - Ring with ornaments**
**Size** : 25mm with and 30mm high
**Scan preparation** : AESUB white scan spray
Scanned on my scan-helper.
**Fusion settings** : 0.02 standart (max)
**Meshing** : 6 (max)
**Fusion result:**
Here you can see that the standard fusion settings result in an excellent resolution - but the point cloud is also very “chaotic” - later you will see how it looks with the advanced settings.
---
### Author:  [@Steamkraft](https://forum.revopoint3d.com/u/Steamkraft)
#### Post date: [January 23, 2024, 5:51pm UTC](https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788/2 "2024-01-23T17:51:14Z")
**Jewelry - Another Ring - more organic shape**
**Size** : 22mm with and 27mm high
**Scan preparation** : AESUB white scan spray (I forgot to take photos with the scan spray 🙂 )
Scanned on my scan-helper.
**Fusion settings** : 0.02 standart (max)
**Meshing** : 6 (max)
With wireframe visible:
and some measurements:
---
### Author:  [@Steamkraft](https://forum.revopoint3d.com/u/Steamkraft)
#### Post date: [January 23, 2024, 6:51pm UTC](https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788/3 "2024-01-23T18:51:56Z")
**Jewelry - And another Ring - this time a full finger ring - articulated ring**
Size: 90mm long
**Scan preparation** : AESUB white scan spray
Here I used my scan helper again and made a hanger with wire to scan it upright
**Fusion settings** : 0.08 Advanced - this time I choose Advanced cause you get a cleaner point cloud
**Meshing** : 6 (max)
Here now is the fusion result - as you can see it looks much cleaner and the resolution is high enough to get a perfect result:
from a different view:
---
### Author:  [@Steamkraft](https://forum.revopoint3d.com/u/Steamkraft)
#### Post date: [January 23, 2024, 7:05pm UTC](https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788/4 "2024-01-23T19:05:26Z")
Here are a few miniatures.
First a really small figure with just 25mm height and very fine parts.
The result really blew me away because you can even see the really small hints of the teeth.
Since this figure is already finished with light gray primer, I don’t need a scan spray
Scanned on my scan-helper.
**Fusion settings** : 0.02 standart (max)
**Meshing** : 6 (max)
here again the fusion result:
and a few measurement results - the fine red line shows what I measured and the result is in millimeters.
first of all, the skull on the helmet, which is just 2 mm in size:
and then the middle tooth with a diameter of 0.23 mm:
---
### Author:  [@Steamkraft](https://forum.revopoint3d.com/u/Steamkraft)
#### Post date: [January 23, 2024, 7:25pm UTC](https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788/5 "2024-01-23T19:25:50Z")
Next, a Warhammer figure in assembled condition (I mention this here because I have something special planned for this figure…)
**Height** 70mm
Since this figure has many hidden areas, it is not easy to scan.
**Fusion settings** : 0.08 **Advanced**
**Meshing settings** : 6
---
### Author:  [@Steamkraft](https://forum.revopoint3d.com/u/Steamkraft)
#### Post date: [January 23, 2024, 8:14pm UTC](https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788/6 "2024-01-23T20:14:27Z")
As already mentioned, I still had plans for the Warhammer figure.
I still have the same figure in individual parts and wanted to see how well it works to scan them and then put them together.
I have now separated them from the frame, but left something on each part to make it easier to attach to my scan helper
Da die Teile in einem doch recht dunkelem grau gehalten sind (auf dem Foto sehen sie heller aus) , habe ich sie auch wieder mit scan spray vorbereitet.
**Starting with the shield:**
**Fusion settings** : 0.08 **Advanced**
**Meshing settings** : 6
**followed by the front part:**
**Fusion settings** : 0.08 **Advanced**
**Meshing settings** : 6
**Then the back:**
**Fusion settings** : 0.08 **Advanced**
**Meshing settings** : 6
**Then the base - I did not pre-treat this with scan spray:**
The base has a diameter of 38mm
I didn’t need a scan helper for this one as it is very easy to scan
**Fusion settings** : 0.08 **Advanced**
**Meshing settings** : 6
**And last but not least the middle part with the head.**
I’m showing this last, because there was actually one part that didn’t really work out.
The reason for this is that the scanner and the software support is still a beta version and there may still be a few minor problems.
I will show you shortly afterward that the scanner is also capable of scanning such “problem areas” on another object.
**Fusion settings** : 0.08 **Advanced**
**Meshing settings** : 6
As you can see, the gap at the head part is partially closed here. Since I’m planning to work on the parts a little anyway, I’m ok with it.
I then edited the individual parts a little in Blender: I smoothed out the places where the parts were attached to the frame a little and opened up the gap in the head part again.
last but not least the parts were positioned correctly and animated:
you can find a 1080p Video of the Animation here:
[ ](https://www.youtube.com/watch?v=6-5OjL9YAxM)
---
### Author:  [@Steamkraft](https://forum.revopoint3d.com/u/Steamkraft)
#### Post date: [January 23, 2024, 8:27pm UTC](https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788/7 "2024-01-23T20:27:03Z")
Now a scan to show that even fine gaps are not really a problem.
I have scanned a needle:
Unfortunately, I forgot to take a photo on the scan helper 🙂
**Fusion settings** : 0.08 **Advanced**
**Meshing settings** : 6
on the second picture I noticed that the needle looks crooked - so I took a closer look at the needle:
… and it is crooked 🙂
now to the dimensions:
I am very satisfied with the result 🙂
---
### Author:  [@Steamkraft](https://forum.revopoint3d.com/u/Steamkraft)
#### Post date: [January 23, 2024, 8:41pm UTC](https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788/8 "2024-01-23T20:41:28Z")
After all these small scans, a larger object.
Since the MINI 2 has a larger single capture range and also the IMU, I scanned the whole thing freehand.
The height is 21 cm
---
### Author:  [@Revopoint-Fay](https://forum.revopoint3d.com/u/Revopoint-Fay)
#### Post date: [January 24, 2024, 7:27am UTC](https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788/9 "2024-01-24T07:27:46Z")
Udo, I have fallen in love with your outstanding work. 😍
---
### Author:  [@Gary](https://forum.revopoint3d.com/u/Gary)
#### Post date: [January 29, 2024, 4:53pm UTC](https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788/10 "2024-01-29T16:53:52Z")
Incredible, the needle 😮
Loving the rest of the scans, yet another really versatile scanner, we’ve seen so many uses in day one.
I also particularly like how you’ve animated the items going together to make the figure.
Thank you 🕶
---
### Author:  [@SphaeroX](https://forum.revopoint3d.com/u/SphaeroX)
#### Post date: [January 30, 2024, 11:41pm UTC](https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788/11 "2024-01-30T23:41:21Z")
Was that in single shot mode?
---
### Author:  [@Steamkraft](https://forum.revopoint3d.com/u/Steamkraft)
#### Post date: [January 31, 2024, 3:11am UTC](https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788/12 "2024-01-31T03:11:44Z")
Hello,
No - every scan was done in Continuous mode 🙂
---
### Author:  [@bau-3d.ch](https://forum.revopoint3d.com/u/bau-3d.ch)
#### Post date: [January 31, 2024, 5:19am UTC](https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788/13 "2024-01-31T05:19:11Z")
that inceaseses the urgent need for one in me too 😃 for that base u used for scanning, is there an stl?
---
### Author:  [@Steamkraft](https://forum.revopoint3d.com/u/Steamkraft)
#### Post date: [January 31, 2024, 5:41am UTC](https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788/14 "2024-01-31T05:41:08Z")
at the moment i did not upload it anywhere cause it was a fast ugly Blender work.
i maybe will upload it and post a link here and on Facebook but just if I don’t do some changes to it in time to upload a better version. (like in the next 3-4days)
---
### Author:  [@Queeblo](https://forum.revopoint3d.com/u/Queeblo)
#### Post date: [September 25, 2025, 4:35am UTC](https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788/15 "2025-09-25T04:35:07Z")
Hey Steamkraft. I know this thread is a bit old now, but hoping you might see this. The base you’re utilizing for the miniatures with lots of features seems very useful. Do you know where I might be able to find one or a file to print that’s similiar? I’m also trying to scan some miniatures using my Metro X but struggling a bit to find a way to get multiple angles properly.
Also tips on which mode to use, currently I’m using the full field, feature scan or marker scan single frame auto turntable. But you’re getting better results just with continuous and whatever setup you have. So if you have any tips It’d be greatly appreciated.
---
### Author:  [@tokyopav](https://forum.revopoint3d.com/u/tokyopav)
#### Post date: [September 25, 2025, 6:50am UTC](https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788/16 "2025-09-25T06:50:05Z")
They all look incredible. Yeah, that scan helper is genius. Great work. Amazing detail.
---
### Author:  [@Queeblo](https://forum.revopoint3d.com/u/Queeblo)
#### Post date: [September 25, 2025, 7:38am UTC](https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788/17 "2025-09-25T07:38:59Z")
Do you know where you can get the scan helper? I desperately need it.
I know basically anything with sufficient geometry will somewhat do, but that think is perfect.
---
### Author:  [@wazza77](https://forum.revopoint3d.com/u/wazza77)
#### Post date: [September 25, 2025, 8:04am UTC](https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788/18 "2025-09-25T08:04:05Z")
I’m sure you could find a 3d print file of one similar on many of the 3D libraries on the net, or @Steamkraft might be able to provide a scan if you don’t have a 3d printer. There are plenty of companies offering reasonable print services
---
### Author:  [@Queeblo](https://forum.revopoint3d.com/u/Queeblo)
#### Post date: [September 25, 2025, 8:46am UTC](https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788/19 "2025-09-25T08:46:57Z")
I recreated this since I posted an hour ago. Once I print it I’ll put it up on a STL sharing site for others
[ ](https://imgur.com/niVqWWV)
---
### Author:  [@Queeblo](https://forum.revopoint3d.com/u/Queeblo)
#### Post date: [September 29, 2025, 4:39pm UTC](https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788/20 "2025-09-29T16:39:27Z")
Thought I’d upload a few pics, just had a chance to try it out. Will upload it now that I have a scan done and a picture of it in action
[Next page](https://forum.revopoint3d.com/t/steamkraft-showcase-revopoint-mini-2-3d-scanner/23788.md?page=2)