# RevoScan 6 - Transform Mode

**URL:** <https://forum.revopoint3d.com/t/revoscan-6-transform-mode/44007>\
**Category:** Suggestions\
**Created:** [September 25, 2026, 1:38pm UTC](https://forum.revopoint3d.com/t/revoscan-6-transform-mode/44007 "2026-09-25T13:38:59Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Frag](https://avatars.discourse-cdn.com/v4/letter/f/cc9497/32.png) [@Frag](https://forum.revopoint3d.com/u/Frag)\
**Post date:** [September 25, 2026, 1:38pm UTC](https://forum.revopoint3d.com/t/revoscan-6-transform-mode/44007/1 "2026-09-25T13:38:59Z")

</div>

The ability to transform the model is certainly a step in the right direction; however, the implementation of this feature was a major disappointment for me. I do have an idea, though, on how to significantly improve this function with relatively minor changes:

1. I would like the view to automatically switch to Orthographic mode upon entering transformation mode. In my opinion, performing transformations in Perspective mode is pointless. Upon exiting transformation mode, the view would revert to the previously used mode.

2. I would like a grid to be displayed on the screen in every view (front, left, right, top, etc.) with a scale that remains constant regardless of the current zoom level. The grid spacing could be set individually. Currently, such a grid is visible only in the top view, and its spacing changes as you zoom in or out. The grid should appear _in front_ of the model (like the rule-of-thirds grid on a digital camera display); this would make orienting the model much easier.

3. Currently, the grid disappears when rotating the model and reappears once the operation is complete. In my opinion, the grid should remain visible at all times.

4. Currently, switching the view plane—for example, from left to top—is cumbersome. Introducing keyboard shortcuts for standard views would greatly streamline the workflow. My proposal:

Left view – Ctrl+Left  
Front view – Ctrl+Down  
Right view – Ctrl+Right  
Top view – Ctrl+Up

---

<div class="post-metadata">

**Author:** ![snrch445](https://avatars.discourse-cdn.com/v4/letter/s/848f3c/32.png) [@snrch445](https://forum.revopoint3d.com/u/snrch445)\
**Post date:** [September 25, 2026, 3:26pm UTC](https://forum.revopoint3d.com/t/revoscan-6-transform-mode/44007/2 "2026-09-25T15:26:16Z")

</div>

I would like to see features I’ve seen in other scanning software. When using global marker scanning, the ability to select 3 or more markers orient on that plane. Bonus for using it as the clipping plane. Or being able to select 3 points on the point cloud. currently need to add another step to the process of exporting and importing in to cloud compare to use the 3 point orientation feature there.