# Revopoint POP Scan of a Crystal Figurine and Resin Printed Miniatures **URL:** \ **Category:** POP Series\ **Created:** [December 23, 2021, 8:58am UTC](https://forum.revopoint3d.com/t/revopoint-pop-scan-of-a-crystal-figurine-and-resin-printed-miniatures/4371 "2021-12-23T08:58:40Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![jumbonot](https://avatars.discourse-cdn.com/v4/letter/j/5e9695/32.png) [@jumbonot](https://forum.revopoint3d.com/u/jumbonot)\ **Post date:** [December 23, 2021, 8:58am UTC](https://forum.revopoint3d.com/t/revopoint-pop-scan-of-a-crystal-figurine-and-resin-printed-miniatures/4371/1 "2021-12-23T08:58:40Z")
[![](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/2/2955efa71d85db77e4f45c2dee55e788c3ad0015.jpeg "Revopoint POP Scan of a Crystal Figurine and Resin Printed Miniatures") ](https://www.youtube.com/watch?v=Szr30MRdNec) I thought I’d share the results of a POP scan from a few months ago. I was experimenting with different developing sprays such as dry shampoo, body powder, Aesub Orange and Blue, spray chalk, etc. to try and improve results with difficult-to-scan subjects, such as this poorly featured crystal figurine. My wife thought this little display idea was cute. ---
**Author:** ![Eldkatten](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/eldkatten/32/1051_2.png) [@Eldkatten](https://forum.revopoint3d.com/u/Eldkatten)\ **Post date:** [December 24, 2021, 10:17am UTC](https://forum.revopoint3d.com/t/revopoint-pop-scan-of-a-crystal-figurine-and-resin-printed-miniatures/4371/2 "2021-12-24T10:17:52Z")
Could you show the scan results with the different “developing sprays”, and/or tell us, which one gave the best result? Also the brand would be nice to know, and how well it was removable from the original afterwards. ---
**Author:** ![jumbonot](https://avatars.discourse-cdn.com/v4/letter/j/5e9695/32.png) [@jumbonot](https://forum.revopoint3d.com/u/jumbonot)\ **Post date:** [December 24, 2021, 5:13pm UTC](https://forum.revopoint3d.com/t/revopoint-pop-scan-of-a-crystal-figurine-and-resin-printed-miniatures/4371/3 "2021-12-24T17:13:45Z")
I’ve found that the Aesub works quite well as a developer, but it smells very nasty. I wear a mask and spray outdoors if I can, The blue disappears after a few hours, while the orange sublimates in about 12 hours. The Testor’s spray chalk goes on pretty thick and dries to a kind of shell that resists damage when handling, but obscures small details. Gold Bond body spray works well if you can tolerate the fragrance. It, of course, leaves a powdery coating that is easily rubbed off if handled. I recently got some Montana Chalk but haven’t had time to explore it much. I sprayed a resin model and can’t remove the coloring with anything I’ve tried. The common variety of kid’s spray chalk was a disaster for small subjects. It is hard to control the thickness of your application and it makes a lot of overspray. I think the cheapest, most versatile spray is the dry shampoo. Works well, easy to get a uniform coating, Wait for it to dry and it can be brushed off. And we know that it’s non-toxic. I guess what really matters is what works for you and your scanning subjects. I hope this is good info. ---
**Author:** ![jumbonot](https://avatars.discourse-cdn.com/v4/letter/j/5e9695/32.png) [@jumbonot](https://forum.revopoint3d.com/u/jumbonot)\ **Post date:** [December 24, 2021, 5:54pm UTC](https://forum.revopoint3d.com/t/revopoint-pop-scan-of-a-crystal-figurine-and-resin-printed-miniatures/4371/4 "2021-12-24T17:54:44Z")
[![](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/4/427a87cb879eaae9de7fc4a6bb81b3d30ca67379.jpeg "Revopoint POP 3D Scans Using Various Developer Spray Coatings") ](https://www.youtube.com/watch?v=FxxBv3-guH4) Hope this is good for you.