# Revopoint mini tracking lost **URL:** \ **Category:** Issues\ **Created:** [July 21, 2023, 8:08pm UTC](https://forum.revopoint3d.com/t/revopoint-mini-tracking-lost/21549 "2023-07-21T20:08:57Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![brenolp](https://avatars.discourse-cdn.com/v4/letter/b/278dde/32.png) [@brenolp](https://forum.revopoint3d.com/u/brenolp)\ **Post date:** [July 21, 2023, 8:08pm UTC](https://forum.revopoint3d.com/t/revopoint-mini-tracking-lost/21549/1 "2023-07-21T20:08:57Z")
Scanner gets lost and can not close the right object there is creating objects inside the object I will show the video to see the reference points below changing position and a mini revopoint > **[WhatsApp Video 2023-07-21 at 16.40.57.mp4](https://drive.google.com/file/d/18pmhhdp4JGXpBR16Nep2U259O8l70nYP/view?usp=sharing)** > > Google Drive file. ---
**Author:** ![JeffLindstrom](https://avatars.discourse-cdn.com/v4/letter/j/ce7236/32.png) [@JeffLindstrom](https://forum.revopoint3d.com/u/JeffLindstrom)\ **Post date:** [July 21, 2023, 9:40pm UTC](https://forum.revopoint3d.com/t/revopoint-mini-tracking-lost/21549/2 "2023-07-21T21:40:40Z")
In my experience, tracking is rarely accurate when transitioning through the thin side. Try adding objects next to what you are scanning to improve your result. ---
**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\ **Post date:** [July 22, 2023, 1:49pm UTC](https://forum.revopoint3d.com/t/revopoint-mini-tracking-lost/21549/3 "2023-07-22T13:49:31Z")
There is not enough tracking points on the sides, use marker mode for this kind of scanning or add additional elements on the sides to support the lack of features , it will helps to stabilize the tracking . And as always the to scan at angle and not direct at 90 degrees. Perfect capture require more than one angle to be scanned to get all the under cuts perfectly not just vertically but also horizontally.