# Programming Dual-Axis Turn Table

**URL:** <https://forum.revopoint3d.com/t/programming-dual-axis-turn-table/22126>\
**Category:** Discussions\
**Created:** [September 25, 2023, 11:48pm UTC](https://forum.revopoint3d.com/t/programming-dual-axis-turn-table/22126 "2023-09-25T23:48:40Z")\
**Posts on this page:** 19\
**Page:** 1

<div class="post-metadata">

**Author:** ![wmcnally](https://avatars.discourse-cdn.com/v4/letter/w/3e96dc/32.png) [@wmcnally](https://forum.revopoint3d.com/u/wmcnally)\
**Post date:** [September 25, 2023, 11:48pm UTC](https://forum.revopoint3d.com/t/programming-dual-axis-turn-table/22126/1 "2023-09-25T23:48:40Z")

</div>

I can’t seem to find settings in RevoScan5 to program the rotations of the turn table at different x-axis angles. Was that feature removed? If so, why? I found these settings in an older version:

 ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/d/d73d1fcccd377431d23900b28e4e2050d16cdade.jpeg)

---

<div class="post-metadata">

**Author:** ![djsteffon](https://avatars.discourse-cdn.com/v4/letter/d/e99b99/32.png) [@djsteffon](https://forum.revopoint3d.com/u/djsteffon)\
**Post date:** [October 14, 2023, 12:31am UTC](https://forum.revopoint3d.com/t/programming-dual-axis-turn-table/22126/2 "2023-10-14T00:31:49Z")

</div>

Exactly…This is an important feature that needs to be included. I bought this turntable solely to have this feature.

---

<div class="post-metadata">

**Author:** ![SphaeroX](https://avatars.discourse-cdn.com/v4/letter/s/5f8ce5/32.png) [@SphaeroX](https://forum.revopoint3d.com/u/SphaeroX)\
**Post date:** [October 23, 2023, 4:04pm UTC](https://forum.revopoint3d.com/t/programming-dual-axis-turn-table/22126/3 "2023-10-23T16:04:39Z")

</div>

Looks like removed

---

<div class="post-metadata">

**Author:** ![Archaeoscan.by](https://avatars.discourse-cdn.com/v4/letter/a/e68b1a/32.png) [@Archaeoscan.by](https://forum.revopoint3d.com/u/Archaeoscan.by)\
**Post date:** [October 24, 2023, 6:45am UTC](https://forum.revopoint3d.com/t/programming-dual-axis-turn-table/22126/4 "2023-10-24T06:45:09Z")

</div>

Indeed it would be fine to integrate the turntable to revoscan more smoothely. Best would be if the scsnner knew how the TT rotates und could predict its movement. I know this would make necesary some kind of calibration to get the starting position, but this eould be great.

---

<div class="post-metadata">

**Author:** ![Revopoint-Jane](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/revopoint-jane/32/12484_2.png) [@Revopoint-Jane](https://forum.revopoint3d.com/u/Revopoint-Jane)\
**Post date:** [October 24, 2023, 6:59am UTC](https://forum.revopoint3d.com/t/programming-dual-axis-turn-table/22126/5 "2023-10-24T06:59:28Z")

</div>

Hi @wmcnally

Welcome to our forum. 🙌

Thank you for your suggestion. I will provide this feedback to our dev team.

---

<div class="post-metadata">

**Author:** ![Revopoint-Jane](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/revopoint-jane/32/12484_2.png) [@Revopoint-Jane](https://forum.revopoint3d.com/u/Revopoint-Jane)\
**Post date:** [October 24, 2023, 7:58am UTC](https://forum.revopoint3d.com/t/programming-dual-axis-turn-table/22126/6 "2023-10-24T07:58:04Z")

</div>

Hi @wmcnally

This feature is not supported in Revo Scan5 and will be considered for addition in subsequent releases.

---

<div class="post-metadata">

**Author:** ![UGMENTALCASE](https://avatars.discourse-cdn.com/v4/letter/u/3da27b/32.png) [@UGMENTALCASE](https://forum.revopoint3d.com/u/UGMENTALCASE)\
**Post date:** [January 1, 2024, 5:26pm UTC](https://forum.revopoint3d.com/t/programming-dual-axis-turn-table/22126/7 "2024-01-01T17:26:10Z")

</div>

I found this also. There is open source program on GitHub. I’ve had someone make a html code which works nicely, going to get it made into a windows exe program as well  
I had it made with multiple lines, so rotate 360°, tilt however many degrees, rotate again. Have added in a pause option as well so it can be use for photography as well.

---

<div class="post-metadata">

**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\
**Post date:** [January 1, 2024, 5:40pm UTC](https://forum.revopoint3d.com/t/programming-dual-axis-turn-table/22126/8 "2024-01-01T17:40:44Z")

</div>

If you have Android phone , here is full android app with all possible combinations for the dual axis … including photogrammetry.

> [@Dual Axis Turntable Controller \[Android \]](https://forum.revopoint3d.com/t/dual-axis-turntable-controller-android/21970/1):
>
> Not official Dual Axis Turn Table App for android available for download Thanks to PUTV for the help and feedback +1 NEW VERSION Android 5.1-13 by @PopUpTheVolume [33ebd80bee5f4a1d89a62281b01fb94bc21f6af8\_2\_690x456] App Screen [2b159dcd1c9f876fb4eb1d2617a911d871cb0a72\_2\_250x500]

---

<div class="post-metadata">

**Author:** ![bau-3d.ch](https://avatars.discourse-cdn.com/v4/letter/b/ba8739/32.png) [@bau-3d.ch](https://forum.revopoint3d.com/u/bau-3d.ch)\
**Post date:** [May 10, 2024, 2:37pm UTC](https://forum.revopoint3d.com/t/programming-dual-axis-turn-table/22126/9 "2024-05-10T14:37:38Z")

</div>

do you have link?

---

<div class="post-metadata">

**Author:** ![krofinski](https://avatars.discourse-cdn.com/v4/letter/k/f6c823/32.png) [@krofinski](https://forum.revopoint3d.com/u/krofinski)\
**Post date:** [May 10, 2024, 6:56pm UTC](https://forum.revopoint3d.com/t/programming-dual-axis-turn-table/22126/11 "2024-05-10T18:56:31Z")

</div>

I suppose it is this one

> **[GitHub - eXplOiD1/Revopoint-Dual-Axis-Turntable-webbased-Controller](https://github.com/eXplOiD1/Revopoint-Dual-Axis-Turntable-webbased-Controller)**
>
> Contribute to eXplOiD1/Revopoint-Dual-Axis-Turntable-webbased-Controller development by creating an account on GitHub.

---

<div class="post-metadata">

**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\
**Post date:** [May 10, 2024, 7:06pm UTC](https://forum.revopoint3d.com/t/programming-dual-axis-turn-table/22126/12 "2024-05-10T19:06:42Z")

</div>

Both controllers works great !

---

<div class="post-metadata">

**Author:** ![bau-3d.ch](https://avatars.discourse-cdn.com/v4/letter/b/ba8739/32.png) [@bau-3d.ch](https://forum.revopoint3d.com/u/bau-3d.ch)\
**Post date:** [May 11, 2024, 6:00am UTC](https://forum.revopoint3d.com/t/programming-dual-axis-turn-table/22126/13 "2024-05-11T06:00:53Z")

</div>

maybe i’m stupid but i didn’t get this one working. for some reason my pc won’t connect via bluetooth to the dualaxis. it’s odd because even in revoscan i have connection issues… it will instantly loose connection after connecting only way so far is to control it by the ios app. i haope they will add a step by step turn function as well soon. seems like i need to get an old android phone, needs one anyways for my gps ntrip services 😃

---

<div class="post-metadata">

**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\
**Post date:** [May 11, 2024, 10:07am UTC](https://forum.revopoint3d.com/t/programming-dual-axis-turn-table/22126/14 "2024-05-11T10:07:03Z")

</div>

Remember the dual axis turntable require location to be able to connect on Android … working great with my Android phone

---

<div class="post-metadata">

**Author:** ![rednet](https://avatars.discourse-cdn.com/v4/letter/r/ea666f/32.png) [@rednet](https://forum.revopoint3d.com/u/rednet)\
**Post date:** [December 1, 2024, 12:25pm UTC](https://forum.revopoint3d.com/t/programming-dual-axis-turn-table/22126/15 "2024-12-01T12:25:00Z")

</div>

Hi, I recently bought a pop 3 together with the Dual Axis turntable and I was wondering when the possibility of programming in revoscan will be reinstated.

---

<div class="post-metadata">

**Author:** ![Revopoint-Jane](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/revopoint-jane/32/12484_2.png) [@Revopoint-Jane](https://forum.revopoint3d.com/u/Revopoint-Jane)\
**Post date:** [December 2, 2024, 2:12am UTC](https://forum.revopoint3d.com/t/programming-dual-axis-turn-table/22126/16 "2024-12-02T02:12:48Z")

</div>

Hello, are you referring to programming for automatic control of scanning using the dual-axis rotary table?

---

<div class="post-metadata">

**Author:** ![rednet](https://avatars.discourse-cdn.com/v4/letter/r/ea666f/32.png) [@rednet](https://forum.revopoint3d.com/u/rednet)\
**Post date:** [December 2, 2024, 7:06am UTC](https://forum.revopoint3d.com/t/programming-dual-axis-turn-table/22126/17 "2024-12-02T07:06:59Z")

</div>

Buongiorno yes correct.

---

<div class="post-metadata">

**Author:** ![charlesian2000](https://avatars.discourse-cdn.com/v4/letter/c/d6d6ee/32.png) [@charlesian2000](https://forum.revopoint3d.com/u/charlesian2000)\
**Post date:** [April 8, 2025, 10:14pm UTC](https://forum.revopoint3d.com/t/programming-dual-axis-turn-table/22126/18 "2025-04-08T22:14:03Z")

</div>

More to this.

There are desktop scanners that we use at work to scan customers models.

They have a set scanning routine. Then you select parts of the model that did not scan well, and subsequent scans are done of that selected area.

We then flip the model to get the other side.

We scan mostly small objects like rings and gemstones.

If you could get the dual axis scanner to have a routine that marries up to your products you would get a lot more business.

The scanners that are your potential competition cost from $5000 to $50,000.

If you added this functionality you would change scanning, of small objects at least, from a scanner that requires an art form to get good scans to a tool that would be used in the jewellery industry.

---

<div class="post-metadata">

**Author:** ![HumArTrick](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/humartrick/32/30876_2.png) [@HumArTrick](https://forum.revopoint3d.com/u/HumArTrick)\
**Post date:** [November 1, 2026, 4:19pm UTC](https://forum.revopoint3d.com/t/programming-dual-axis-turn-table/22126/19 "2026-11-01T16:19:48Z")

</div>

Him any news if the function will be re-implemented in revo scan 6 or following versions?

---

<div class="post-metadata">

**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\
**Post date:** [November 2, 2026, 2:08am UTC](https://forum.revopoint3d.com/t/programming-dual-axis-turn-table/22126/20 "2026-11-02T02:08:40Z")

</div>

Hi @HumArTrick

Right now there are no news regarding this topic
