# Prinpit Showcase Metrox/Mini2 **URL:** \ **Category:** Showcases\ **Created:** [February 9, 2025, 1:37pm UTC](https://forum.revopoint3d.com/t/prinpit-showcase-metrox-mini2/33572 "2025-02-09T13:37:23Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Pitter](https://avatars.discourse-cdn.com/v4/letter/p/3da27b/32.png) [@Pitter](https://forum.revopoint3d.com/u/Pitter)\ **Post date:** [February 9, 2025, 1:37pm UTC](https://forum.revopoint3d.com/t/prinpit-showcase-metrox-mini2/33572/1 "2025-02-09T13:37:23Z")
As a passionate archer, I design grips for the various recurve bows. For this I need scans of the original grips and the corresponding centre pieces as a basis. So far the grips have been scanned in several views (Mini2 or MetroX) and then merged in Revoscan. Now there is the option of controlling the 2-axis turntable via Revoscan. I have found various tools in MAKERWORLD that allow me to capture the complex handles in one scan. I have printed the extensions for the 2-axis turntable from the following parts. **PAW85** [https://makerworld.com/en/@Paw85/collections](https://makerworld.com/en/@Paw85/collections) **FB2210** [https://makerworld.com/en/@FB2210](https://makerworld.com/en/@FB2210) Thank you both very much for your ideas! I designed various parts myself, such as the centre plate with the thread and the magnets. The upper ring was modified with through holes. Below is an idea of the possibilities. ![Demo_01](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/3X/e/b/eb9758f98922953f21eb4c5bcfb577a9e6ab700d.jpeg) ![Demo_02](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/3X/3/3/335dd1d524d2089cd082b3c448540ed6d2936ecd.jpeg) And here is the setup with the part to be scanned: ![Aufbau_01](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/3X/e/b/eb1387410835f1e4601b135fdd956161983fe57c.jpeg) ![Aufbau_02](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/3X/3/c/3c9a576ee9a0bb99ea347d0e2fdb20d54f0512f6.jpeg) The handle was scanned in 5 rounds -30° / -15° / 0° / 15° / 30° in 7° steps in full-field mode. ![Raw_01](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/3X/5/b/5b48d938196a44974e8cde69ed2a0b6ab1ed0cfe.jpeg) ![Raw_02](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/3X/d/4/d4a2294b1bb6facd653a243f3d907dd8b3a64f5d.png) Processed in Revoscan: ![ready02](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/3X/8/8/88bb253a8079cb5ea3aa1cb999cdd6e481cfa260.jpeg) Further processing took place in: - Alignment in GOM Inspect - Removal of the scan holder in Meshmixer or FUSION360 First rough printout for test purposes: ![Test-Griff](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/3X/1/f/1f28a0ad86288e8c25511b5914382abc0f1bde7c.jpeg) My suggestions to the development team: It would be fantastic if it were possible to specify whether the scan should be clockwise or counter-clockwise for each round of the turntable. ---
**Author:** ![Revopoint-Jane](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/revopoint-jane/32/12484_2.png) [@Revopoint-Jane](https://forum.revopoint3d.com/u/Revopoint-Jane)\ **Post date:** [February 10, 2025, 9:42am UTC](https://forum.revopoint3d.com/t/prinpit-showcase-metrox-mini2/33572/2 "2025-02-10T09:42:22Z")
Great design and scan! We will pass along your suggestions, thank you. ---
**Author:** ![Pitter](https://avatars.discourse-cdn.com/v4/letter/p/3da27b/32.png) [@Pitter](https://forum.revopoint3d.com/u/Pitter)\ **Post date:** [February 10, 2025, 4:45pm UTC](https://forum.revopoint3d.com/t/prinpit-showcase-metrox-mini2/33572/3 "2025-02-10T16:45:05Z")
**2nd round** I also need the riser for testing and presentation purposes. I used the crosslaser mode for this. **The riser:** (shiny red, with many holes, undercut and free-form surfaces) Material: aluminium, milled and anodised ![Border](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/3X/a/9/a96bcc073320166d236b0af1bfc250421ea58887.jpeg) **The preparation** The holder and scan markers were largely designed by me ![Border_Front_01](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/3X/1/8/182da7f530c1368246faac88e15dd555a732ccaa.jpeg) ![Border_Griffseite](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/3X/c/8/c8e52f141cc97946159b3a9e23e40e70eff0648d.jpeg) Scanned in crossline mode, front and back. ![Griffseite](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/3X/6/7/6774d8654abfe5d769b9980d185d9ff26783e1d8.jpeg) ![Bereinigt_01](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/3X/b/9/b9adef6da5c63840b0252d41a3330047fdf08bd1.jpeg) Both scans were then automatically merged. (for my purposes I only need the centre part, so the ends were cut off). ![merged_01](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/3X/5/2/5241163543cc84fcf5f19b5498f955d309de153f.jpeg) Below is the part completed in Revoscan, which is still being reworked in Blender to create a stand. ![02102025150638](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/3X/a/0/a0b9bbd9edcdb1f88c1938321d7fe9cfc9b5de36.jpeg) ![02102025150724](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/3X/a/6/a611d8f29a311819b55139ad2c9397ec2b091716.jpeg) Especially with such complex parts, the preparation, design and creation of tools is very important. For the technically interested: 30051 frames were rendered for the first scan and 21896 frames for the second scan. The creation of the point cloud took approx. 9 minutes in both cases. Here are the specs of my PC: - INTEL I9-10900 CPU - 64GBytes DDR4 Ram - NVIDIA GeForce RTX 4070 12GByte ---
**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\ **Post date:** [February 11, 2025, 3:43am UTC](https://forum.revopoint3d.com/t/prinpit-showcase-metrox-mini2/33572/4 "2025-02-11T03:43:50Z")
That’s great scan, I see you had not much issues with the red color when using Laser mode or you used spray ? Thanks for sharing ! ---
**Author:** ![Pitter](https://avatars.discourse-cdn.com/v4/letter/p/3da27b/32.png) [@Pitter](https://forum.revopoint3d.com/u/Pitter)\ **Post date:** [February 11, 2025, 6:25am UTC](https://forum.revopoint3d.com/t/prinpit-showcase-metrox-mini2/33572/5 "2025-02-11T06:25:26Z")
No spray, just crosslaser mode with marker tracking. ---
**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\ **Post date:** [February 11, 2025, 8:07pm UTC](https://forum.revopoint3d.com/t/prinpit-showcase-metrox-mini2/33572/6 "2025-02-11T20:07:26Z")
Beautiful results !