# Pop2 connection

**URL:** <https://forum.revopoint3d.com/t/pop2-connection/25063>\
**Category:** Customer support\
**Created:** [April 18, 2024, 2:45pm UTC](https://forum.revopoint3d.com/t/pop2-connection/25063 "2024-04-18T14:45:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Trav](https://avatars.discourse-cdn.com/v4/letter/t/ba8739/32.png) [@Trav](https://forum.revopoint3d.com/u/Trav)\
**Post date:** [April 18, 2024, 2:45pm UTC](https://forum.revopoint3d.com/t/pop2-connection/25063/1 "2024-04-18T14:45:41Z")

</div>

I just bought a pop2 and was wondering if anyone could help me with connecting to an iPhone. It says to just open wifi or Bluetooth and wait for it to come up? I’m not the best with this sort of stuff any tips would be great! Thanks

---

<div class="post-metadata">

**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\
**Post date:** [April 18, 2024, 5:16pm UTC](https://forum.revopoint3d.com/t/pop2-connection/25063/2 "2024-04-18T17:16:33Z")

</div>

Hi @Trav

You need to go to your phone WiFi setting , after you connect your scanner to power source ( not your phone ) the network will show up on your phone and you can connect to the scanner WiFi network, then open your Revi Scan App.

Check the Tutorial section to learn more about how to operate your scanner

> **[Tutorials](https://forum.revopoint3d.com/c/tutorials/21)**
>
> Find helpful 3D scanning tutorials and tips here!