# POP 3 test on actual bones?

**URL:** <https://forum.revopoint3d.com/t/pop-3-test-on-actual-bones/21243>\
**Category:** POP Series\
**Created:** [June 11, 2023, 12:20pm UTC](https://forum.revopoint3d.com/t/pop-3-test-on-actual-bones/21243 "2023-06-11T12:20:07Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![ZoltanTheZ](https://avatars.discourse-cdn.com/v4/letter/z/779978/32.png) [@ZoltanTheZ](https://forum.revopoint3d.com/u/ZoltanTheZ)\
**Post date:** [June 15, 2023, 12:10pm UTC](https://forum.revopoint3d.com/t/pop-3-test-on-actual-bones/21243/9 "2023-06-15T12:10:15Z")

</div>

This one was done in three scans that were merged in Revoscan.

This Coyote was done in one scan with the POP3:

> [@ZoltanTheZ POP 3 Showcase - Coyote!](https://forum.revopoint3d.com/t/zoltanthez-pop-3-showcase-coyote/21223):
>
> The POP 3 is here, and it is very impressive! You can pre-order it now! Global site: [POP 3: The Handheld 3D Scanner with Color Scans - Revopoint](https://bit.ly/Zoltan1) US Site: [POP 3: The Handheld 3D Scanner with Color Scans - Revopoint](https://bit.ly/3X5lvBB)

This was scanned with the RANGE:

> [@A Buck Skull Scanned with the Range](https://forum.revopoint3d.com/t/a-buck-skull-scanned-with-the-range/21080/6):
>
> This is exactly what I’ll be using my scanner for. I have a mini but it can’t handle anything bigger than a mug sized object. I might be swapping it with a Pop2. Hoping to get the same kind of results doing full wall mounts in colour

This was scanned with the MINI:

> [@A Lynx Skull Scanned with the MINI](https://forum.revopoint3d.com/t/a-lynx-skull-scanned-with-the-mini/21081):
>
> Here is an excellent scan done with the MINI of a Lynx skull that shows complex geometry, deep cavities, thin features, and a high level of surface detail.

---

_[View the full topic](https://forum.revopoint3d.com/t/pop-3-test-on-actual-bones/21243)._