# Option to only export result from Miraco

**URL:** <https://forum.revopoint3d.com/t/option-to-only-export-result-from-miraco/23659>\
**Category:** Suggestions\
**Created:** [January 12, 2024, 2:17pm UTC](https://forum.revopoint3d.com/t/option-to-only-export-result-from-miraco/23659 "2024-01-12T14:17:23Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bjrno](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/bjrno/32/15571_2.png) [@Bjrno](https://forum.revopoint3d.com/u/Bjrno)\
**Post date:** [January 12, 2024, 2:17pm UTC](https://forum.revopoint3d.com/t/option-to-only-export-result-from-miraco/23659/1 "2024-01-12T14:17:23Z")

</div>

I think we can safely say, that since the Miraco is meant as a stand alone device, in many cases the only thing you actually would want to export from it is the final result (mesh or textured mesh). As far as I can see this is not possible currently.

When using a Mac, where Miraco can’t work as external drive according to the message when the Miraco is in data transfer mode, and [currently doesn’t work at all over USB](https://forum.revopoint3d.com/t/revoscan-5-4-1-doesnt-see-the-miraco-over-usb-macos/23365/50), this means you need to have Revoscan 5 installed and you need to transfer the entire project over wifi, just to be able to export the obj or stl.

1. What I would like to see: option to share the stl or obj directly from the Miraco.
2. Ability to use the Miraco as external drive on a Mac
3. The general USB issue as mentioned before fixed (not fixed in 5.4.2).
4. Option to use a USB(-C) drive with the miraco to transfer files.

Thanks  
Björn