# Miraco Plus need help

**URL:** <https://forum.revopoint3d.com/t/miraco-plus-need-help/35601>\
**Category:** MIRACO Series\
**Tags:** miraco\
**Created:** [March 28, 2025, 2:33pm UTC](https://forum.revopoint3d.com/t/miraco-plus-need-help/35601 "2025-03-28T14:33:04Z")\
**Posts on this page:** 1\
**Showing post:** 14

<div class="post-metadata">

**Author:** ![Snakegreen](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/snakegreen/32/24866_2.png) [@Snakegreen](https://forum.revopoint3d.com/u/Snakegreen)\
**Post date:** [March 30, 2025, 3:51am UTC](https://forum.revopoint3d.com/t/miraco-plus-need-help/35601/14 "2025-03-30T03:51:36Z")

</div>

> [@Scan quality poor?](https://forum.revopoint3d.com/t/scan-quality-poor/23372/8):
>
> You probably used Standard fusing … use Advanced fusing , it produces beautiful results . My coin was fused at 0.2 in Advanced mode and meshed at 4.3 and the results are perfect , if I fused it at standard 0.05 and meshed at 7 I would get a disk full of sand and no details . You see pointcloud cage is the most important base for you scan … too high meshing can actually induce artificial noises and erase the details . Don’t worry if you fuse the scan at 0.2 in Advanced mode you will not lose a…

I don’t say anything about coins at all, they don’t work out in principle. The only thing that gives a more or less digestible result is One-Click Edit. But it eats up almost all the detail. It seems to me that I shouldn’t have upgraded.

---

_[View the full topic](https://forum.revopoint3d.com/t/miraco-plus-need-help/35601)._
