# Mini No longer Connects, LED Remains Red **URL:** \ **Category:** Customer support\ **Created:** [December 28, 2023, 8:15pm UTC](https://forum.revopoint3d.com/t/mini-no-longer-connects-led-remains-red/23476 "2023-12-28T20:15:46Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![mpstek](https://avatars.discourse-cdn.com/v4/letter/m/c77e96/32.png) [@mpstek](https://forum.revopoint3d.com/u/mpstek)\ **Post date:** [December 28, 2023, 8:15pm UTC](https://forum.revopoint3d.com/t/mini-no-longer-connects-led-remains-red/23476/1 "2023-12-28T20:15:46Z")
Hello, I own a mini and also a range scanner. I am able to connect to range every known way. My mini no longer connects to anything and remains led red. 1.) Tried Powering mini by power bank and split cable. No Wireless Connection shown. 2.) Tried 10 presses reset and re power. Nothing different happens. 3.) Led Remains Red 4.) Both cameras seen correctly on USB. 5.) App privacy settings fine Thank You! ---
**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\ **Post date:** [December 28, 2023, 8:30pm UTC](https://forum.revopoint3d.com/t/mini-no-longer-connects-led-remains-red/23476/2 "2023-12-28T20:30:28Z")
Hi @mpstek I am surprised that you can see both camera via USB but still the back of the RED is red and not Green . I think the best thing here is to write to [customer@revopoint3d.com](mailto:customer@revopoint3d.com) for hardware assistance since you already did everything possible and we run here out of ideas . I guess you checked my tutorial ? > [@\[Tutorial\] MINI | POP2 | RANGE - Firmware Update Error - Tip | Fix](https://forum.revopoint3d.com/t/tutorial-mini-pop2-range-firmware-update-error-tip-fix/18657): > > This tip is for an issue when you start Revo Scan and you get prompt pop up window asking you to upgrade your device’s firmware but after the process your device got stuck on blue light and can’t connect back to Revo Scan . This means, your device is in safe upgrade mode that did not finished correctly . To prepare your device for correct update in this case please follow exactly the next steps . When the device is off and not connected to the computer do as follow: Press and hold… ---
**Author:** ![mpstek](https://avatars.discourse-cdn.com/v4/letter/m/c77e96/32.png) [@mpstek](https://forum.revopoint3d.com/u/mpstek)\ **Post date:** [December 28, 2023, 10:43pm UTC](https://forum.revopoint3d.com/t/mini-no-longer-connects-led-remains-red/23476/3 "2023-12-28T22:43:34Z")
Hi @PUTV I will give your tutorial another go round. See what happens. I’ll contact them then if I’m still not having any luck. Thanks! ---
**Author:** ![mpstek](https://avatars.discourse-cdn.com/v4/letter/m/c77e96/32.png) [@mpstek](https://forum.revopoint3d.com/u/mpstek)\ **Post date:** [December 29, 2023, 5:33am UTC](https://forum.revopoint3d.com/t/mini-no-longer-connects-led-remains-red/23476/4 "2023-12-29T05:33:43Z")
Hello Again @PUTV I was able to put the unit in flash mode and successfully flash the unit. I can see 2 usb device and phone connects to wireless. But still not able to connect software to the unit through either. I guess I will contact support. Thanks! ---
**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\ **Post date:** [December 29, 2023, 9:39am UTC](https://forum.revopoint3d.com/t/mini-no-longer-connects-led-remains-red/23476/5 "2023-12-29T09:39:22Z")
Hi @mpstek Did you got the green led on ? Did you tried now the split cable on computer ? It should connect to RS5.4.1 If not please write to [customer@revopoint3d.com](mailto:customer@revopoint3d.com) and link this thread for reference. ---
**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\ **Post date:** [December 29, 2023, 5:48pm UTC](https://forum.revopoint3d.com/t/mini-no-longer-connects-led-remains-red/23476/7 "2023-12-29T17:48:36Z")
> [@mpstek](#): > > Mini I hear the usb sound tone and it shows up in > in device manager but led stay red and doesn’t ever connect to RS5.4.1. Ok it is stock on reboot , please write to [customer@revopoint3d.com](mailto:customer@revopoint3d.com) they will help you restore the firmware after you make appointment, sadly after Jan 2nd since the office is closed for the New Year holidays .