# MetroX Scan of Hyundai i30 Window Regulator Panel

**URL:** <https://forum.revopoint3d.com/t/metrox-scan-of-hyundai-i30-window-regulator-panel/36556>\
**Category:** Showcases\
**Tags:** reverse-engineering, metrox, revoscan5metrox\
**Created:** [April 23, 2025, 12:47am UTC](https://forum.revopoint3d.com/t/metrox-scan-of-hyundai-i30-window-regulator-panel/36556 "2025-04-23T00:47:26Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Prototype\_Engineers](https://avatars.discourse-cdn.com/v4/letter/p/8491ac/32.png) [@Prototype\_Engineers](https://forum.revopoint3d.com/u/Prototype_Engineers)\
**Post date:** [April 23, 2025, 12:47am UTC](https://forum.revopoint3d.com/t/metrox-scan-of-hyundai-i30-window-regulator-panel/36556/1 "2025-04-23T00:47:26Z")

</div>

We used the Revopoint MetroX to 3D scan a front driver side window regulator panel from an FD Hyundai i30.

The process was super efficient, and the detail we captured? Absolutely next level ! 🔍

Perfect foundation for accurate CAD work and design decisions.

 ![Window_Reg_Screen_Shot](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/3X/d/1/d1bbfdbdb05ed1a5247fb26cb9d0693968b636e5.jpeg)

> **[Prototype Engineers](https://www.facebook.com/share/p/16ANMuDgcP/)**
>
> 🎯 Precision in the Details
> 
> Just wrapped up another 3D scan using the Revopoint MetroX—this time on a Holden Colorado centre console and detached screen.
> 
> The result? Imported the scan straight into...

---

<div class="post-metadata">

**Author:** ![Gary](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/gary/32/3791_2.png) [@Gary](https://forum.revopoint3d.com/u/Gary)\
**Post date:** [April 29, 2025, 9:16pm UTC](https://forum.revopoint3d.com/t/metrox-scan-of-hyundai-i30-window-regulator-panel/36556/2 "2025-04-29T21:16:55Z")

</div>

Sweet scan, lovely and clear. Did you use Global Marker or just normal marker mode.

---

<div class="post-metadata">

**Author:** ![Prototype\_Engineers](https://avatars.discourse-cdn.com/v4/letter/p/8491ac/32.png) [@Prototype\_Engineers](https://forum.revopoint3d.com/u/Prototype_Engineers)\
**Post date:** [April 30, 2025, 4:23am UTC](https://forum.revopoint3d.com/t/metrox-scan-of-hyundai-i30-window-regulator-panel/36556/3 "2025-04-30T04:23:03Z")

</div>

Yup. Used Global Marker! It worked out so sweet. Overall, the process for scanning was less than 10 minutes, including Global Marker scan first, followed by the actual scan.