# Merging Bug point cloud vs. mesh: seam lines, orange peel

**URL:** <https://forum.revopoint3d.com/t/merging-bug-point-cloud-vs-mesh-seam-lines-orange-peel/35169>\
**Category:** Customer support\
**Created:** [March 17, 2025, 4:59pm UTC](https://forum.revopoint3d.com/t/merging-bug-point-cloud-vs-mesh-seam-lines-orange-peel/35169 "2025-03-17T16:59:05Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Archaeoscan.by](https://avatars.discourse-cdn.com/v4/letter/a/e68b1a/32.png) [@Archaeoscan.by](https://forum.revopoint3d.com/u/Archaeoscan.by)\
**Post date:** [March 17, 2025, 4:59pm UTC](https://forum.revopoint3d.com/t/merging-bug-point-cloud-vs-mesh-seam-lines-orange-peel/35169/1 "2025-03-17T16:59:05Z")

</div>

Dear revopoint team,  
please see my comments here and finally take care of this really annoying issue:

> [@Single scan better than multiple scans + merging?](https://forum.revopoint3d.com/t/single-scan-better-than-multiple-scans-merging/24613/13):
>
> In my experience, this problem occurs not only in global marker mode. Here an example, scanned in AutoTT: #1 fused, everything is neat and nice: #2 meshed an messy: By the way, this is a small flint blade, anybody can give me hints on catching the thin edges even better?

It occurs in Revoscan and Revosan Metrox.

---

<div class="post-metadata">

**Author:** ![Revopoint-Jane](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/revopoint-jane/32/12484_2.png) [@Revopoint-Jane](https://forum.revopoint3d.com/u/Revopoint-Jane)\
**Post date:** [March 18, 2025, 10:16am UTC](https://forum.revopoint3d.com/t/merging-bug-point-cloud-vs-mesh-seam-lines-orange-peel/35169/2 "2025-03-18T10:16:02Z")

</div>

Hello, we are already working on resolving this issue. Please be patient, and thank you for your understanding!

---

<div class="post-metadata">

**Author:** ![Archaeoscan.by](https://avatars.discourse-cdn.com/v4/letter/a/e68b1a/32.png) [@Archaeoscan.by](https://forum.revopoint3d.com/u/Archaeoscan.by)\
**Post date:** [March 18, 2025, 12:16pm UTC](https://forum.revopoint3d.com/t/merging-bug-point-cloud-vs-mesh-seam-lines-orange-peel/35169/3 "2025-03-18T12:16:50Z")

</div>

Thanks a lot!  
It’s a really important issue. Revopoint products are great, but bugs are annoying ant time-consuming.