# Manual merging not doing what i want it too

**URL:** <https://forum.revopoint3d.com/t/manual-merging-not-doing-what-i-want-it-too/41680>\
**Category:** Discussions\
**Tags:** inspire2\
**Created:** [January 6, 2026, 9:53pm UTC](https://forum.revopoint3d.com/t/manual-merging-not-doing-what-i-want-it-too/41680 "2026-01-06T21:53:21Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![ihatecad](https://avatars.discourse-cdn.com/v4/letter/i/91b2a8/32.png) [@ihatecad](https://forum.revopoint3d.com/u/ihatecad)\
**Post date:** [January 6, 2026, 9:53pm UTC](https://forum.revopoint3d.com/t/manual-merging-not-doing-what-i-want-it-too/41680/1 "2026-01-06T21:53:21Z")

</div>

im having a lot of issues aligning two parts of this scan i just made like the points line up but like i need one or both parts to rotate in order for them to align point 1 and 2 put in the right spots align them but once point 3 gets introduced it just ignores it and doesn’t do what i want it too

 ![Project01072026085459 7_01_2026 10_49_55 AM](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/3X/3/5/35b4b18bcd2324c4b06a93dbf9ed69f085175012.jpeg)

---

<div class="post-metadata">

**Author:** ![ihatecad](https://avatars.discourse-cdn.com/v4/letter/i/91b2a8/32.png) [@ihatecad](https://forum.revopoint3d.com/u/ihatecad)\
**Post date:** [January 6, 2026, 9:57pm UTC](https://forum.revopoint3d.com/t/manual-merging-not-doing-what-i-want-it-too/41680/2 "2026-01-06T21:57:18Z")

</div>

![Project01072026085459 7_01_2026 10_56_53 AM](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/3X/c/7/c73f2c45e7b866a949693cd7bc7e5fb5d2b3c167.jpeg)

---

<div class="post-metadata">

**Author:** ![Nickluvin](https://avatars.discourse-cdn.com/v4/letter/n/d78d45/32.png) [@Nickluvin](https://forum.revopoint3d.com/u/Nickluvin)\
**Post date:** [January 7, 2026, 12:50am UTC](https://forum.revopoint3d.com/t/manual-merging-not-doing-what-i-want-it-too/41680/3 "2026-01-07T00:50:49Z")

</div>

Pull them into Cloud Compare and align them in there

---

<div class="post-metadata">

**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\
**Post date:** [January 7, 2026, 1:11am UTC](https://forum.revopoint3d.com/t/manual-merging-not-doing-what-i-want-it-too/41680/4 "2026-01-07T01:11:58Z")

</div>

Hi @ihatecad

You need to have the same features on both scans , this here will never works scanned this way , for this kind job you need to scan it in virtual position, scan the half top then half bottom and then you have inside and out scanned with proper features.

As Nick suggested , use Cloud compare and manually align it there be manually rotating them in the right position if you don’t want to rescan it again .

---

<div class="post-metadata">

**Author:** ![MonsterMaxx](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/monstermaxx/32/22736_2.png) [@MonsterMaxx](https://forum.revopoint3d.com/u/MonsterMaxx)\
**Post date:** [January 7, 2026, 8:05pm UTC](https://forum.revopoint3d.com/t/manual-merging-not-doing-what-i-want-it-too/41680/5 "2026-01-07T20:05:31Z")

</div>

I find that when there’s not enough unique features in a top and bottom to align, that I need to take one more scan from the side and use it as an intermediary. This has always worked for me and is SOP now. Not that I won’t try w/ a top and bottom scan, but when there’s not enough captured to align, a side scan fixes it.

---

<div class="post-metadata">

**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\
**Post date:** [January 7, 2026, 8:11pm UTC](https://forum.revopoint3d.com/t/manual-merging-not-doing-what-i-want-it-too/41680/6 "2026-01-07T20:11:38Z")

</div>

It help too to do that … So totally agree

---

<div class="post-metadata">

**Author:** ![ihatecad](https://avatars.discourse-cdn.com/v4/letter/i/91b2a8/32.png) [@ihatecad](https://forum.revopoint3d.com/u/ihatecad)\
**Post date:** [January 7, 2026, 8:34pm UTC](https://forum.revopoint3d.com/t/manual-merging-not-doing-what-i-want-it-too/41680/7 "2026-01-07T20:34:45Z")

</div>

so i figured that out on the very next scan which happened before i saw these comments and yeah i got some of the exterior details on the interior part of the scan and it merged exactly how it was supposed too as for the scan that triggered this post imma just send it since its got all the details that i required
