# Losing resolution and data upon meshing in Revoscan

**URL:** <https://forum.revopoint3d.com/t/losing-resolution-and-data-upon-meshing-in-revoscan/24671>\
**Category:** Support & Feedback\
**Created:** [April 1, 2024, 6:24pm UTC](https://forum.revopoint3d.com/t/losing-resolution-and-data-upon-meshing-in-revoscan/24671 "2024-04-01T18:24:12Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![ivan](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/ivan/32/16571_2.png) [@ivan](https://forum.revopoint3d.com/u/ivan)\
**Post date:** [April 1, 2024, 7:49pm UTC](https://forum.revopoint3d.com/t/losing-resolution-and-data-upon-meshing-in-revoscan/24671/2 "2024-04-01T19:49:11Z")

</div>

Hi!  
for higher density mesh you will have to export the pointcloud to freeware cloud compare and mesh it there.

> [@3D Scanning Guy - Showcase - RANGE 2](https://forum.revopoint3d.com/t/3d-scanning-guy-showcase-range-2/23926/8):
>
> Yeah, I mean at the moment Level 6 inside RS5 is like an Octree 10 Poisson Reconstruction inside CC… in fact I they’re almost identical, down to the “threadbaring” artefact on the front pocket of the hoodie, from too harsh oversampling. I actually also tried it in CC at Octree 12 (see attached - on the right) which I guess is like a Level 8 in RS5, and is just a wee bit too far into the noise side for my liking. So Octree 11 in CC (with everything else at default) or a RS5 Level 7 is pretty muc…

---

_[View the full topic](https://forum.revopoint3d.com/t/losing-resolution-and-data-upon-meshing-in-revoscan/24671)._