# Jagged object Miraco

**URL:** <https://forum.revopoint3d.com/t/jagged-object-miraco/31598>\
**Category:** MIRACO Series\
**Tags:** miraco\
**Created:** [January 2, 2025, 5:52pm UTC](https://forum.revopoint3d.com/t/jagged-object-miraco/31598 "2025-01-02T17:52:13Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![rednet](https://avatars.discourse-cdn.com/v4/letter/r/ea666f/32.png) [@rednet](https://forum.revopoint3d.com/u/rednet)\
**Post date:** [January 2, 2025, 5:52pm UTC](https://forum.revopoint3d.com/t/jagged-object-miraco/31598/1 "2025-01-02T17:52:13Z")

</div>

I happen to scan an object on a plate that is always black and the part of the object is always not uniform as in the photo, is it possible to overcome this problem or do I need to use post production software

 ![2025-01-02 (1)](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/3X/8/c/8c5c6e8ca5c70898b235f1fde395b26283280b06.png)

---

<div class="post-metadata">

**Author:** ![Revopoint-Jane](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/revopoint-jane/32/12484_2.png) [@Revopoint-Jane](https://forum.revopoint3d.com/u/Revopoint-Jane)\
**Post date:** [January 3, 2025, 2:26am UTC](https://forum.revopoint3d.com/t/jagged-object-miraco/31598/2 "2025-01-03T02:26:11Z")

</div>

Hi @rednet

Are you saying that when you scan an object with flat edges using MIRACO, placed on a black plate, you’re seeing these jagged edges in the scan results?  
Would you be able to take a picture of your scanned object for us to see?

---

<div class="post-metadata">

**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\
**Post date:** [January 3, 2025, 6:26am UTC](https://forum.revopoint3d.com/t/jagged-object-miraco/31598/3 "2025-01-03T06:26:17Z")

</div>

You get edges like that if you do not captured it completely , the parts are missed , you need to capture the full end of the object if possible .  
You can also trim it with the tools on the right side .

---

<div class="post-metadata">

**Author:** ![rednet](https://avatars.discourse-cdn.com/v4/letter/r/ea666f/32.png) [@rednet](https://forum.revopoint3d.com/u/rednet)\
**Post date:** [January 4, 2025, 7:58am UTC](https://forum.revopoint3d.com/t/jagged-object-miraco/31598/4 "2025-01-04T07:58:05Z")

</div>

it’s a baseball cap

---

<div class="post-metadata">

**Author:** ![SphaeroX](https://avatars.discourse-cdn.com/v4/letter/s/5f8ce5/32.png) [@SphaeroX](https://forum.revopoint3d.com/u/SphaeroX)\
**Post date:** [January 4, 2025, 11:33am UTC](https://forum.revopoint3d.com/t/jagged-object-miraco/31598/5 "2025-01-04T11:33:42Z")

</div>

Personally, I find scanning edges the most difficult, especially with thin objects.  
@PUTV Do you have a tip for us?

Something like that:

 ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/3X/a/a/aa1bf316a58e247c4cc33950ce693feb65c2c2bf.jpeg)

---

<div class="post-metadata">

**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\
**Post date:** [January 6, 2025, 9:54am UTC](https://forum.revopoint3d.com/t/jagged-object-miraco/31598/6 "2025-01-06T09:54:13Z")

</div>

Sadly there is nothing I can help you here with.  
The Algorithms are response for that beside the fine edges.  
If you are not able to get the whole edges you get what you got, I tried everything but there is not trick to solve it .