# Feature request: Print-ready export - optimize scan for 3D printing and hand off directly to slicers (OrcaSlicer, Bambu Studio, etc.)

**URL:** <https://forum.revopoint3d.com/t/feature-request-print-ready-export-optimize-scan-for-3d-printing-and-hand-off-directly-to-slicers-orcaslicer-bambu-studio-etc/43869>\
**Category:** Support & Feedback\
**Created:** [September 6, 2026, 3:00pm UTC](https://forum.revopoint3d.com/t/feature-request-print-ready-export-optimize-scan-for-3d-printing-and-hand-off-directly-to-slicers-orcaslicer-bambu-studio-etc/43869 "2026-09-06T15:00:08Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![fabian\_k\_at](https://avatars.discourse-cdn.com/v4/letter/f/ac91a4/32.png) [@fabian\_k\_at](https://forum.revopoint3d.com/u/fabian_k_at)\
**Post date:** [September 6, 2026, 3:00pm UTC](https://forum.revopoint3d.com/t/feature-request-print-ready-export-optimize-scan-for-3d-printing-and-hand-off-directly-to-slicers-orcaslicer-bambu-studio-etc/43869/1 "2026-09-06T15:00:08Z")

</div>

Hello Revopoint team and fellow makers,

Here’s a feature idea aimed squarely at the 3D printing community - which, I suspect, is a large part of the Revopoint user base.

**The idea:** Add a dedicated “Prepare for 3D Printing” export path in Revo Scan 6 that optimizes the finished scan for printing and hands it off directly to popular slicers.

**What it could do (one click, after mesh generation):**

1. **Print-readiness checks & auto-repair:**

2. **Slicer handoff:**

**Why this matters:**

Right now the scan-to-print workflow for us makers is: scan → edit → export STL → open slicer → hope the mesh is manifold → fix issues in a third-party tool → slice. The scanner already does the hard part (a clean 0.03 mm mesh); the last mile is manual glue work in separate tools.

As far as I can tell, no 3D scanner vendor ships their scanning software with a print-ready pipeline tuned for the maker community yet. Revopoint would be the first to close that loop - scan on a POP 4, one click, slicer opens with a watertight model. That would make Revopoint scanners considerably more attractive for the 3D printing crowd and create a strong differentiator.

The POP 4 already exports STL and 3MF, so the building blocks (mesh generation, formats) exist - this is about adding a print-optimized finishing pass and the slicer handoff on top.

Thanks for considering it!

---

<div class="post-metadata">

**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\
**Post date:** [September 7, 2026, 1:00am UTC](https://forum.revopoint3d.com/t/feature-request-print-ready-export-optimize-scan-for-3d-printing-and-hand-off-directly-to-slicers-orcaslicer-bambu-studio-etc/43869/2 "2026-09-07T01:00:48Z")

</div>

Hi @fabian_k_at

Thank you for your feedback and suggestions