# Dual axis table mounting objects **URL:** \ **Category:** Discussions\ **Created:** [December 26, 2022, 10:09pm UTC](https://forum.revopoint3d.com/t/dual-axis-table-mounting-objects/18874 "2022-12-26T22:09:54Z")\ **Posts on this page:** 17\ **Page:** 1
**Author:** ![kaczorefx](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/kaczorefx/32/2688_2.png) [@kaczorefx](https://forum.revopoint3d.com/u/kaczorefx)\ **Post date:** [December 26, 2022, 10:09pm UTC](https://forum.revopoint3d.com/t/dual-axis-table-mounting-objects/18874/1 "2022-12-26T22:09:54Z")
So since it has been out for a while, what is your way of mounting objects to the tilting table. I ordered some silicon pads (similar to the one in Pop2 turn table that you put under the big 4piece circle) but that just helps with sliding around. When the table tilts (especially more than 15 deg) my objects just fall off. If not immediately then after a couple of seconds - the table vibrations seem to help get the object loose 😉 Also anyone made any rigs that would screw into the threaded holes? ---
**Author:** ![Miamijerry](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/miamijerry/32/4734_2.png) [@Miamijerry](https://forum.revopoint3d.com/u/Miamijerry)\ **Post date:** [December 27, 2022, 3:08am UTC](https://forum.revopoint3d.com/t/dual-axis-table-mounting-objects/18874/2 "2022-12-27T03:08:42Z")
> **[Revopoint Dual-Axis Turntable 130mm Three Jaw Chuck mdkendall-Remix |...](https://www.thingiverse.com/thing:5603969)** > > This is a remix of mdkendalls successful "2.5" three-jaw chuck" for mounting on a Revopoint dual-axis turntable. The chuck can be mounted on the turntable with M6x8 countersunk screws or with the screws developed by Whitehawk2000. From mdkendall you... ---
**Author:** ![SphaeroX](https://avatars.discourse-cdn.com/v4/letter/s/5f8ce5/32.png) [@SphaeroX](https://forum.revopoint3d.com/u/SphaeroX)\ **Post date:** [December 27, 2022, 7:12am UTC](https://forum.revopoint3d.com/t/dual-axis-table-mounting-objects/18874/3 "2022-12-27T07:12:30Z")
This ist my solution [https://www.printables.com/model/290464-revopoint-dual-axis-turntable-clamping-device](https://www.printables.com/model/290464-revopoint-dual-axis-turntable-clamping-device) ---
**Author:** ![Martijn](https://avatars.discourse-cdn.com/v4/letter/m/dbc845/32.png) [@Martijn](https://forum.revopoint3d.com/u/Martijn)\ **Post date:** [December 28, 2022, 2:42pm UTC](https://forum.revopoint3d.com/t/dual-axis-table-mounting-objects/18874/4 "2022-12-28T14:42:20Z")
Nice chuck clamps!! This soft black modelling clays also works very good for certain objects. ![IMG_6205 Large](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/d/d9f9e7afd5a28f624449bf2af8377aa7a488ab02.jpeg) ---
**Author:** ![kaczorefx](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/kaczorefx/32/2688_2.png) [@kaczorefx](https://forum.revopoint3d.com/u/kaczorefx)\ **Post date:** [December 28, 2022, 2:55pm UTC](https://forum.revopoint3d.com/t/dual-axis-table-mounting-objects/18874/5 "2022-12-28T14:55:55Z")
The clamps thing… wow… seriously… wow. I love this community 😂 Still it looks a little overkill, it covers a large part of the scanned object. It also makes you think - Revopoint made these holes for a reason, has anyone ever seen what their intended use was? ---
**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\ **Post date:** [January 1, 2023, 6:26pm UTC](https://forum.revopoint3d.com/t/dual-axis-table-mounting-objects/18874/6 "2023-01-01T18:26:34Z")
> [@kaczorefx](#): > > also makes you think - Revopoint made these holes for a reason, has anyone ever seen what their intended use was? Did you ever saw how microscope holds the glass strips in place ? That’s how it should be used . I actually have it already made , will post after my holidays . ---
**Author:** ![kaczorefx](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/kaczorefx/32/2688_2.png) [@kaczorefx](https://forum.revopoint3d.com/u/kaczorefx)\ **Post date:** [January 1, 2023, 7:38pm UTC](https://forum.revopoint3d.com/t/dual-axis-table-mounting-objects/18874/7 "2023-01-01T19:38:18Z")
> [@PUTV](#): > > Did you ever saw how microscope holds the glass strips in place ? 😶 yyyeaaah…? ---
**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\ **Post date:** [January 1, 2023, 7:56pm UTC](https://forum.revopoint3d.com/t/dual-axis-table-mounting-objects/18874/8 "2023-01-01T19:56:19Z")
That’s how it should holds any object no matter the size , from a ring to a figurine and prevent it from sliding down even if it is a simple coffee mug ---
**Author:** ![kaczorefx](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/kaczorefx/32/2688_2.png) [@kaczorefx](https://forum.revopoint3d.com/u/kaczorefx)\ **Post date:** [January 1, 2023, 8:00pm UTC](https://forum.revopoint3d.com/t/dual-axis-table-mounting-objects/18874/9 "2023-01-01T20:00:58Z")
Yeah, I’m gonna go for the visual aid here I think. All the microscopes I ever encountered had thin metal strips to hold the glass specimen. Great for pinning down flat elements to a flat table - not sure how they could hold a mug though 🤔 ---
**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\ **Post date:** [January 1, 2023, 8:43pm UTC](https://forum.revopoint3d.com/t/dual-axis-table-mounting-objects/18874/10 "2023-01-01T20:43:13Z")
I will show you tomorrow. ---
**Author:** ![KonstisSFX](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/konstissfx/32/5376_2.png) [@KonstisSFX](https://forum.revopoint3d.com/u/KonstisSFX)\ **Post date:** [January 3, 2023, 4:10pm UTC](https://forum.revopoint3d.com/t/dual-axis-table-mounting-objects/18874/11 "2023-01-03T16:10:53Z")
I made a mounting device for classic cast heads like they are used in the the special effects and wigs industry. [https://www.printables.com/model/342868-revopoint-dual-axis-turntable-wighead-mount](https://www.printables.com/model/342868-revopoint-dual-axis-turntable-wighead-mount) It’s a somewhat more specialized area, but working with 3D scanners and printers gets there more and more usual ---
**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\ **Post date:** [January 3, 2023, 4:18pm UTC](https://forum.revopoint3d.com/t/dual-axis-table-mounting-objects/18874/12 "2023-01-03T16:18:52Z")
That is great design @KonstisSFX now I would remove the middle part and use the plastic straps to hold the object inside from sliding down . It would works with anything no matter the size . ---
**Author:** ![KonstisSFX](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/konstissfx/32/5376_2.png) [@KonstisSFX](https://forum.revopoint3d.com/u/KonstisSFX)\ **Post date:** [January 3, 2023, 5:05pm UTC](https://forum.revopoint3d.com/t/dual-axis-table-mounting-objects/18874/13 "2023-01-03T17:05:37Z")
Actually didn’t think of that 😅 I will upload the straps only and a new idea I had this evening. ---
**Author:** ![KonstisSFX](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/konstissfx/32/5376_2.png) [@KonstisSFX](https://forum.revopoint3d.com/u/KonstisSFX)\ **Post date:** [January 3, 2023, 7:39pm UTC](https://forum.revopoint3d.com/t/dual-axis-table-mounting-objects/18874/14 "2023-01-03T19:39:33Z")
I made a version for flexible filament and one for rigid filament. I added them to the Revopoint Dual-Axis-Turntable Wighead mount Files: [https://www.printables.com/model/342868-revopoint-dual-axis-turntable-wighead-mount/files](https://www.printables.com/model/342868-revopoint-dual-axis-turntable-wighead-mount/files) Hope you all like it and find it useful. ---
**Author:** ![kaczorefx](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/kaczorefx/32/2688_2.png) [@kaczorefx](https://forum.revopoint3d.com/u/kaczorefx)\ **Post date:** [January 3, 2023, 8:58pm UTC](https://forum.revopoint3d.com/t/dual-axis-table-mounting-objects/18874/15 "2023-01-03T20:58:23Z")
Very very cool 🙂 Apparently there is a minimum of 20 characters on this forum, wth? I can’t tell you “Good job”, I have to tell you “You’ve done a very respectfull effort and the results are outstanding - good job 😂” ---
**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\ **Post date:** [January 3, 2023, 9:11pm UTC](https://forum.revopoint3d.com/t/dual-axis-table-mounting-objects/18874/16 "2023-01-03T21:11:06Z")
Lol Filip , that was funny 🤣 @KonstisSFX great job ! ---
**Author:** ![Johnathan](https://avatars.discourse-cdn.com/v4/letter/j/67e7ee/32.png) [@Johnathan](https://forum.revopoint3d.com/u/Johnathan)\ **Post date:** [January 5, 2023, 1:24am UTC](https://forum.revopoint3d.com/t/dual-axis-table-mounting-objects/18874/17 "2023-01-05T01:24:09Z")
I was going to reply but couldn’t think of enough characters 😜🤣