# Dual access turn table

**URL:** <https://forum.revopoint3d.com/t/dual-access-turn-table/23031>\
**Category:** Customer support\
**Created:** [November 24, 2023, 9:35pm UTC](https://forum.revopoint3d.com/t/dual-access-turn-table/23031 "2023-11-24T21:35:41Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Peter34](https://avatars.discourse-cdn.com/v4/letter/p/d2c977/32.png) [@Peter34](https://forum.revopoint3d.com/u/Peter34)\
**Post date:** [November 24, 2023, 9:35pm UTC](https://forum.revopoint3d.com/t/dual-access-turn-table/23031/1 "2023-11-24T21:35:41Z")

</div>

Open my dual access turntable today and the dots are on a separate mat. How is this supposed to be fixed to the base because as soon it tilts the mat just slides off cannot find anything about this on the web

 ![17008616988964405568142429347399](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/2X/e/e2ffb6e2ecbcbcf106da2c1175a9c74f553a4b52.jpeg)

---

<div class="post-metadata">

**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\
**Post date:** [November 25, 2023, 4:44am UTC](https://forum.revopoint3d.com/t/dual-access-turn-table/23031/2 "2023-11-25T04:44:12Z")

</div>

you don’t want the dots to be fixed as that will cause issues when scanning in Feature mode , just use some double tape , the dots ( markers) are only needed in marker mode with a hard to scan objects that have no features.

and if you really want the markers just stick the one you got with your scanner

---

<div class="post-metadata">

**Author:** ![Archaeoscan.by](https://avatars.discourse-cdn.com/v4/letter/a/e68b1a/32.png) [@Archaeoscan.by](https://forum.revopoint3d.com/u/Archaeoscan.by)\
**Post date:** [November 25, 2023, 7:43am UTC](https://forum.revopoint3d.com/t/dual-access-turn-table/23031/3 "2023-11-25T07:43:35Z")

</div>

My dual axis TT came with fixed markers on the plate. Is there really a problem with the dots when scanning in feature mode?

---

<div class="post-metadata">

**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\
**Post date:** [November 25, 2023, 1:20pm UTC](https://forum.revopoint3d.com/t/dual-access-turn-table/23031/4 "2023-11-25T13:20:42Z")

</div>

The one we got was not reflective so difficult when the TT was tilted, I put over it the reflective stickers … purchased a black silicone cover so nothing slide from it . Also when you use MINI you want the small mini markers and not the big one …

So not really a problem but when scanning in feature mode and small thing , the white dots are captured sometimes and it affect the auto fusing settings so all captured markers should be removed in the raw mode before fusing .