# Brand new MetroX not working in feature mode (full field) at all

**URL:** <https://forum.revopoint3d.com/t/brand-new-metrox-not-working-in-feature-mode-full-field-at-all/39811>\
**Category:** Customer support\
**Tags:** metrox\
**Created:** [August 9, 2025, 6:46pm UTC](https://forum.revopoint3d.com/t/brand-new-metrox-not-working-in-feature-mode-full-field-at-all/39811 "2025-08-09T18:46:32Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![cjh83](https://avatars.discourse-cdn.com/v4/letter/c/3bc359/32.png) [@cjh83](https://forum.revopoint3d.com/u/cjh83)\
**Post date:** [August 9, 2025, 6:46pm UTC](https://forum.revopoint3d.com/t/brand-new-metrox-not-working-in-feature-mode-full-field-at-all/39811/1 "2025-08-09T18:46:32Z")

</div>

My brand new MetroX is not working like it should at all. In marker mode it can scan the flat plate of the turntable but it even has trouble doing that. I messed with all the GPU/CPU settings, exposure, uninstalled and reinstalled… NOTHING has made this thing work like all the tutorial videos. Calibration does not seem to help. The quality map is completely blank. I think the unit is defective. I’ll see if the support team that I emailed can help. I had low expectations but this unit doesn’t appear to work at all.

 ![image](https://canada1.discourse-cdn.com/flex029/uploads/revopoint3d/original/3X/9/0/909325d4fca2e7a9db30bd7cdd5ab711d62714d1.png)

---

<div class="post-metadata">

**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\
**Post date:** [August 11, 2025, 3:26am UTC](https://forum.revopoint3d.com/t/brand-new-metrox-not-working-in-feature-mode-full-field-at-all/39811/2 "2025-08-11T03:26:37Z")

</div>

Hi @cjh83

The exposure with the bust should be set on 1 , if nothing appears in the viewport it means the projector is not responding correctly in Full Field mode, I assume you checked the other modes without issues right ?

GPU acceleration is only for use with Laser mode .

Check other mode as well , the technical team will evaluate the hardware for you so keep an eye on the email from [customer@revopoint3d.com](mailto:customer@revopoint3d.com)

If you already wrote to them about .

There is nothing else I can do for you from the forum here.
