# Automated Control of Dual Axis Turntable with Revoscan 5

**URL:** <https://forum.revopoint3d.com/t/automated-control-of-dual-axis-turntable-with-revoscan-5/21886>\
**Category:** Suggestions\
**Created:** [August 26, 2023, 3:11pm UTC](https://forum.revopoint3d.com/t/automated-control-of-dual-axis-turntable-with-revoscan-5/21886 "2023-08-26T15:11:55Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Aupuma](https://avatars.discourse-cdn.com/v4/letter/a/5f8ce5/32.png) [@Aupuma](https://forum.revopoint3d.com/u/Aupuma)\
**Post date:** [August 26, 2023, 3:11pm UTC](https://forum.revopoint3d.com/t/automated-control-of-dual-axis-turntable-with-revoscan-5/21886/1 "2023-08-26T15:11:55Z")

</div>

Hey, I’ve just purchased the POP 3 advanced edition that came with the dual axis turntable. However, when connecting it to Revoscan 5 in PC I can only change the speed and angle, and if I stop the scan it keeps spinning.  
It would be great addition if the table stopped and resumed movement when stopping/resuming the scan. Also, I’ve seen that in previous versions of the Revopoint software you could program a routine so the table changed its angle after each 360 rotation, that would be quite useful again in the new update of Revoscan

---

<div class="post-metadata">

**Author:** ![chanhdd](https://avatars.discourse-cdn.com/v4/letter/c/cab0a1/32.png) [@chanhdd](https://forum.revopoint3d.com/u/chanhdd)\
**Post date:** [December 10, 2023, 1:53pm UTC](https://forum.revopoint3d.com/t/automated-control-of-dual-axis-turntable-with-revoscan-5/21886/2 "2023-12-10T13:53:41Z")

</div>

Totally agree. That would be a great feature.  
I don’t understand why that feature was removed in the Revo5.

---

<div class="post-metadata">

**Author:** ![Revopoint-Jane](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/revopoint-jane/32/12484_2.png) [@Revopoint-Jane](https://forum.revopoint3d.com/u/Revopoint-Jane)\
**Post date:** [December 11, 2023, 6:49am UTC](https://forum.revopoint3d.com/t/automated-control-of-dual-axis-turntable-with-revoscan-5/21886/3 "2023-12-11T06:49:58Z")

</div>

Hi @Aupuma @chanhdd

We have noted this Requirement and our dev team is evaluating it.

Thank you for your suggestion!emphasized text

---

<div class="post-metadata">

**Author:** ![PUTV](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.revopoint3d.com/putv/32/15302_2.png) [@PUTV](https://forum.revopoint3d.com/u/PUTV)\
**Post date:** [December 12, 2023, 6:21am UTC](https://forum.revopoint3d.com/t/automated-control-of-dual-axis-turntable-with-revoscan-5/21886/4 "2023-12-12T06:21:26Z")

</div>

> [@Aupuma](#):
>
> Also, I’ve seen that in previous versions of the Revopoint software you could program a routine so the table changed its angle after each 360 rotation, that would be quite useful again in the new update of Revoscan

@chanhdd @Aupuma

Technically it was not usable the way it was programmed , too many overlapping and overscanning while scanning , the reason it is not more used .

If you have Android phone you can use an app and program full scanning cycle the proper way .  
You can download it here : [Dual Axis Turntable Controller [Android]](https://forum.revopoint3d.com/t/dual-axis-turntable-controller-android/21970/1)