# 5.4.7 dual-axis control sync with scanner
**URL:** https://forum.revopoint3d.com/t/5-4-7-dual-axis-control-sync-with-scanner/25779
**Category:** Support & Feedback
**Created:** [May 18, 2024, 8:40pm UTC](https://forum.revopoint3d.com/t/5-4-7-dual-axis-control-sync-with-scanner/25779 "2024-05-18T20:40:51Z")
**Posts on this page:** 6
**Page:** 1
### Author:  [@BoneLady](https://forum.revopoint3d.com/u/BoneLady)
#### Post date: [May 18, 2024, 8:40pm UTC](https://forum.revopoint3d.com/t/5-4-7-dual-axis-control-sync-with-scanner/25779/1 "2024-05-18T20:40:51Z")
First time using the 5.4.7 version and I do not like this new feature that when the scanner pauses, the turntable stops. Is there a way to unsync them? When I turn the switch off, then neither the scanner (POP3) nor the turntable start up again.
Reason I prefer the turntable to keep rotating during a pause is so the frame # does not increase while I wait for the places that are not scanned well to rotate into scanner-view These are horse neck bones and there are some nooks and crannies that need a bit more attention.
Thanks all for any suggestions!
Pamela (Bone Lady)
---
### Author:  [@PUTV](https://forum.revopoint3d.com/u/PUTV)
#### Post date: [May 18, 2024, 8:56pm UTC](https://forum.revopoint3d.com/t/5-4-7-dual-axis-control-sync-with-scanner/25779/2 "2024-05-18T20:56:18Z")
Hi Pamela, that why I am using Android app for scan difficult to scan objects , the way it is now it is for simple organic objects only .
I case you don’t know already
> [@Dual Axis Turntable Controller \[Android \]](https://forum.revopoint3d.com/t/dual-axis-turntable-controller-android/21970/1):
>
> Not official Dual Axis Turn Table App for android available for download Thanks to PUTV for the help and feedback +1 NEW VERSION Android 5.1-13 by @PopUpTheVolume [33ebd80bee5f4a1d89a62281b01fb94bc21f6af8\_2\_690x456] App Screen [2b159dcd1c9f876fb4eb1d2617a911d871cb0a72\_2\_250x500]
---
### Author:  [@SphaeroX](https://forum.revopoint3d.com/u/SphaeroX)
#### Post date: [May 19, 2024, 7:11am UTC](https://forum.revopoint3d.com/t/5-4-7-dual-axis-control-sync-with-scanner/25779/3 "2024-05-19T07:11:15Z")
theres should be an option for that to disable the sync
---
### Author:  [@PUTV](https://forum.revopoint3d.com/u/PUTV)
#### Post date: [May 19, 2024, 11:54pm UTC](https://forum.revopoint3d.com/t/5-4-7-dual-axis-control-sync-with-scanner/25779/4 "2024-05-19T23:54:01Z")
I did not used it with the RS5 software for some time …
---
### Author:  [@Revopoint-Jane](https://forum.revopoint3d.com/u/Revopoint-Jane)
#### Post date: [May 23, 2024, 6:48am UTC](https://forum.revopoint3d.com/t/5-4-7-dual-axis-control-sync-with-scanner/25779/5 "2024-05-23T06:48:09Z")
Hi @BoneLady
Thank you very much for your feedback on V5.4.7. I will consult our R&D team on this issue. I will keep you informed if there are any updates.
---
### Author:  [@Revopoint-Jane](https://forum.revopoint3d.com/u/Revopoint-Jane)
#### Post date: [May 23, 2024, 7:43am UTC](https://forum.revopoint3d.com/t/5-4-7-dual-axis-control-sync-with-scanner/25779/6 "2024-05-23T07:43:45Z")
May I ask why you don’t just turn off this option to keep the dual axis turntable from synchronizing with the scanner?
